rheth Posted November 17, 2014 Report Share Posted November 17, 2014 can anyone tell me where I can get a depth gauge wheel screw for a mark 1 ferret locator have been told by staff at timpsons they are 2.5mm wide and 4mm depth but they didn't have that size.tried Deben but they say they don't have spares any more for these any help appreciated. Quote Link to comment Share on other sites More sharing options...
The Essex Hunter Posted November 17, 2014 Report Share Posted November 17, 2014 can anyone tell me where I can get a depth gauge wheel screw for a mark 1 ferret locator have been told by staff at timpsons they are 2.5mm wide and 4mm depth but they didn't have that size.tried Deben but they say they don't have spares any more for these any help appreciated. Go look for an old tranny radio....the little portable ones, the wheel in the mk 1 is the same, so is the switch!! I picked up a couple some time back to do the same job...when you find one use a bit of low strength Loctite or some of the wife's nail varnish as a thread lock TEH Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.