Jump to content

Weihrauch HW80 .22


Recommended Posts

Weihrauch HW80

£550

.22 Air Rifle Private Seller
Used - Average Condition Essex, Greater London
Break Barrel

Description

Probably going to regret it and Thought I would never sell this but needs must and has to go.

HW80 .22 with 30mm V-glide Piston ( ringed ) full v mach kit with custom v mach heavy spring guide. transfer port has been increased to 3.6mm

older 80k barrel with a custom ukneil parallel 30mm 8 inch reflex type silencer slips over the barrel 2.5 to 3 inches to reduce length a bit and baffles behind. you can remove internals with screw top and replace with the hair curler system if you like and will include some sound deadening material I purchased from a hoover company. Camo tape is removable and is a silver finish.

A used hw80 Tinbum tuning kit with spring guide and 3 different size top hats for spring compression ( no need for washers ) quite good kits for sub 12 smooth and quiet.

Standard used hw80 spring, guide, shims, piston seal and Rear open sight.

Extra parts from v mach are brand new removable rivot pin, shims, spare washers one ptfe, v mach grease and unused top hat.

Abby maintenance kit and some moly.

OP TECH USA very high quality performance sling with bisley stud and barrel clamp ( one of the best/comfortable slings I have used )

Choice of one gun slip as seen in photos.

2 camo Neoprene stock covers with 4 shotgun shell containers ( handy for pellets )

2 scopes from a choice of 3, Boxed BSA 3-9 X 50 WR 30mm Essencial with 30mm 1 piece mount, Nikko stirling mount master 3-9 x 40 AO with mounts and a AGS 3-9 x 50 MD2 with mounts, all mil-dot But the AGS does have a lot damage to the turrets where someone has taken off but still functions ok and is being used on the rifle now.

Nearly full tin of HN FTt

I also have a KOMBAT military assault pack somewhere to carry all the above in that I will throw in if I can find it,

The power adjuster basically uses the same principle as the air arms s410 by interrupting the transfer port with different length 3mm grub screws with o ring seals. Please study the photos and contact me by phone if you would like to ask any questions.

Now this rifle has been used in the field purely for hunting and has reduced the Essex rabbit population quite a bit the last year or so as you can imagine, therefore its not a show piece and a few dings / scratches here and there some pitting but not to bad, The end of the barrel was damaged from a previous silencer but is covered by the fitted ukneil one now, also damage behind one of the shims. newer shape stock is in very good condition as was covered by the neoprene. I will try and get some more pics up soon please send me your email if you want hi res photos.

I know this wont be everyone's cup of tea but have to say this is the best springer I have ever used and even better work horse hunting tool.

I would like £550 for all the above which I think is a far price considering the amount time and effort that went into this project also the spare parts could tune another hw80 maybe 2 if you have a spare spring.

Also can do a trade with a dive cylinder W.H.Y

At the moment its face to face but can meet within a reasonable distance but most welcome to view / try at my house in Essex near Romford area as well.

I don't want to split if I can help it but i can sell the rifle on its own without the extras if interested.

I am also selling a webley stirrup pump in the near future please see photos

Please PM me for my telephone number if you want to discuss any queries.

atb.

Tye.


This gun is being sold by Pigeon Watch member tyephillips. Message them here

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...