Toots Kaye Posted August 1, 2015 Report Share Posted August 1, 2015 Am I correct that a super ten in .22 port size is 4mm ,now there is ally one in at the moment and it's very big ,is this ok ,it looks like one of those from a fac kit,ta,,,pops Quote Link to comment Share on other sites More sharing options...
old man Posted August 2, 2015 Report Share Posted August 2, 2015 Respectfully. Not sure where you are coming from/going with this but if you don't have a slot for it? Get tested and rid of to an RFD? Quote Link to comment Share on other sites More sharing options...
Marki Posted August 2, 2015 Report Share Posted August 2, 2015 Check it with a chrono first. Quote Link to comment Share on other sites More sharing options...
bigman Posted August 2, 2015 Report Share Posted August 2, 2015 Probably got big power curve if the ports on the large side Quote Link to comment Share on other sites More sharing options...
evo Posted August 2, 2015 Report Share Posted August 2, 2015 someone sounds like there trying to turn power up,, my advice is,,,,,,,don't do it,,,your freedom is worth more Quote Link to comment Share on other sites More sharing options...
Big Gnat Posted August 10, 2015 Report Share Posted August 10, 2015 Standard size should be 1.5 mm if regulated 2mm Quote Link to comment Share on other sites More sharing options...
Toots Kaye Posted August 19, 2015 Author Report Share Posted August 19, 2015 Standard size should be 1.5 mm if regulated 2mm Um ,it's super ten and it is regulated and you say it is or would be 2 mm ,is that right ? Why I ask is when you order one for 12fte it's 4mm i/s dia so can you tell me where you get 2mm from ,,,ta, Andi. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.