Jump to content

Gunmark kestrel 3 inch mag


flippermaj
 Share

Recommended Posts

Hi there,

 

Looking for some feedback on this type of gun. Love my aya but it's only 2.75 chambers, fed up with my semi being fussy on 3.5 inch carts so looking at getting a gun mark kestrel magnum choked half and half.

 

I know it's not steel proofed but there seem to be plenty of folk who run 3 inch steel through non steel proofed guns.

 

A different story but I was next to a guy on the foreshore with an old sxs and asked what carts he was using, he produced some 3 inch express carts, I then pointed out to him his gun was only chambered for 2.75 inch !!! He and the gun had survived!.

 

I know anser2 tried using a new aya mag but ruined it,

 

Any feedback on the kestrel appreciated.

 

Thanks

 

Mark

Link to comment
Share on other sites

It's possible but extremely stupid and dangerous. Of course it's sometimes possible to lengthen the chamber and send a gun for re- proof in steel

If proof excepted older guns for steel proof in the unaltered 3" magnums I might bet most in good condition might pass

Link to comment
Share on other sites

I have a kestrel that is 3" and choked 1/2 and 1/2 and I've put steel through it no problems, action is as tight as the day it came from factory - only trouble being I can't get on with sxs which is a pity as it is a great fowling gun. Two barrels, two triggers what could wrong. My mate also owns one and rates it highly to.

Link to comment
Share on other sites

I have a kestrel that is 3" and choked 1/2 and 1/2 and I've put steel through it no problems, action is as tight as the day it came from factory - only trouble being I

can't get on with sxs which is a pity as it is a great fowling gun. Two barrels, two triggers what could wrong. My mate also owns one and rates it highly to.

 

My own choice is blne sxs after the auto. Nothing much wrong with them
Link to comment
Share on other sites

Albert 888, I looked at the 3.5 inch Yilditz but it's a beast and I am aiming for one gun for everything and dont think the weight of the Yilditz would be too handy in a pigeon hide or roost shoot.

 

Edenman, what carts does your mate use for geese through the Kestrel?

 

Thanks

 

Mark

The one i looked at and handled was too light ,there must be two models then!

Link to comment
Share on other sites

got one bored quarter and quarter..good gun put several types of 3in shell through it and no probs at all.....

A good plan and very suited to duck over decoys or on evening flight

I have one ratty old magnum choked skeet and skeet. It's great for teal and wigeon on a flash

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...