babs2020 Posted March 24, 2016 Report Share Posted March 24, 2016 Hi guys got old shooting bus nissan terrano knocking on front only happen when you set off get about 5 or 6 glunks changed the uj on front drive shaft but still doing it anybody got any glues what it might be Quote Link to comment Share on other sites More sharing options...
TONY R Posted March 24, 2016 Report Share Posted March 24, 2016 Check the Front CV joints . And while you have it jacked up check the front wheel bearings. could be a few things but start here. Quote Link to comment Share on other sites More sharing options...
hoggysreels Posted March 24, 2016 Report Share Posted March 24, 2016 Anti-roll bar bushes and possibly links ... its common on the Terrano Quote Link to comment Share on other sites More sharing options...
babs2020 Posted March 24, 2016 Author Report Share Posted March 24, 2016 Had mechanic look at it say s Bush and roll bars ok seems think it's something to do with hub Quote Link to comment Share on other sites More sharing options...
TONY R Posted March 25, 2016 Report Share Posted March 25, 2016 Had mechanic look at it say s Bush and roll bars ok seems think it's something to do with hub outer cv or hub bearing needs adjustment, are rear seals ok . Quote Link to comment Share on other sites More sharing options...
39TDS Posted March 25, 2016 Report Share Posted March 25, 2016 Most likely the free wheeling mechanism in the hub. If you are lucky you might get away with taking it apart, cleaning, greasing and putting it back together. If you are unlucky you will need to source some new (used) bits to go in there. Undo the outer hub held on with allen screws and take the gubbins out. Simple enough job for DIY unless a complete numpty. Won't do any harm to leave the bits out IIRC but you won't have 4WD. Caused usually by lack of maintenance and more so by not reversing a few yards when taking out of 4WD. Quote Link to comment Share on other sites More sharing options...
babs2020 Posted March 25, 2016 Author Report Share Posted March 25, 2016 great thanks going to have look tomorrow Quote Link to comment Share on other sites More sharing options...
babs2020 Posted March 28, 2016 Author Report Share Posted March 28, 2016 Fixed it was one of the locking washes if that's what they are called one of the lugs had broken off thanks Quote Link to comment Share on other sites More sharing options...
39TDS Posted March 28, 2016 Report Share Posted March 28, 2016 Fixed it was one of the locking washes if that's what they are called one of the lugs had broken off thanks Inside the hub? Thought so. Quote Link to comment Share on other sites More sharing options...
babs2020 Posted March 28, 2016 Author Report Share Posted March 28, 2016 Yes mate and thanks Quote Link to comment Share on other sites More sharing options...
39TDS Posted March 28, 2016 Report Share Posted March 28, 2016 Quote Link to comment Share on other sites More sharing options...
four-wheel-drive Posted April 16, 2016 Report Share Posted April 16, 2016 I had a lot of problems with trying to get a fault sorted on my 2000 Jeep Cherokee when I put it in four wheel drive one of the front wheels would bind I thought it wast the transfer case but non of the garages that I took it to would agree with me in the end I took it to a guy who mostly looks after 4x4s and he agreed with me I got a second hand one and he fitted it and the problem was sorted after nearly a year of scratching our heads. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.