Wivy Posted May 10, 2016 Report Share Posted May 10, 2016 Looking for an adjustable butt plate to fit a Browning 525, ideally with both up/down/height and pitch adjustment. Something along the lines of the below link. http://www.brownells.co.uk/epages/UK.sf/en_GB/?ObjectPath=/Shops/UK/Products/00301070606100/SubProducts/070000002 Was wondering if anyone had any experience with such things or advice on where to get a suitable one? Thanks Quote Link to comment Share on other sites More sharing options...
Gordon R Posted May 10, 2016 Report Share Posted May 10, 2016 (edited) Bisley do one, but for rifles. They are less than £15. I took the rifle butt pad off and glued - you could screw one on - a normal shotgun recoil pad on. You could do the whole job for less than £30. They sell on Ebay. I did one a few years ago - looked fine. Edited May 10, 2016 by Gordon R Quote Link to comment Share on other sites More sharing options...
jasper682 Posted May 12, 2016 Report Share Posted May 12, 2016 Have a look on recoilsystems.com for their Isis adjustable recoil pad. Highly recommended. Quote Link to comment Share on other sites More sharing options...
Salopian Posted May 12, 2016 Report Share Posted May 12, 2016 Have a look at a Jones adjustable pad fitted with a Isis thick Green pad. Quote Link to comment Share on other sites More sharing options...
HDAV Posted May 12, 2016 Report Share Posted May 12, 2016 Have a look on recoilsystems.com for their Isis adjustable recoil pad. Highly recommended. Yep got one it's great Quote Link to comment Share on other sites More sharing options...
Wivy Posted May 12, 2016 Author Report Share Posted May 12, 2016 Appreciate the input. Any suggestions on pads that come with adjustable pitch as well? or is this best achieved by spacers and or filing down the pad? Quote Link to comment Share on other sites More sharing options...
PhilR Posted May 12, 2016 Report Share Posted May 12, 2016 Kickeez apart from doing ordinary spacers to extend length also make ones that are wedge shaped to adjust the pitch. They need grinding to fit. Quote Link to comment Share on other sites More sharing options...
Gordon R Posted May 12, 2016 Report Share Posted May 12, 2016 Any suggestions on pads that come with adjustable pitch as well? or is this best achieved by spacers and or filing down the pad? The Bisley does all that you asked for. Quote Link to comment Share on other sites More sharing options...
OGGIE Posted May 26, 2016 Report Share Posted May 26, 2016 As mentioned above fit a Jones through the pad adjuster. http://www.alanrhone.com/products-jones-padadjuster.html If you know anyone going to the USA have them bring one back. Alan. Quote Link to comment Share on other sites More sharing options...
brett1985 Posted May 27, 2016 Report Share Posted May 27, 2016 as above... jones adjuster. it will come over sized so will need taking down, but its an easy process if you have the right gear. here's a picture of mine that I finished off last week. took about 2 and a half hours all in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.