ASunnyD Posted September 30, 2016 Report Share Posted September 30, 2016 Blueing has got a little bit of rust starting to come through, is there anything I can do to blast that rust and keep it protected? Quote Link to comment Share on other sites More sharing options...
figgy Posted October 1, 2016 Report Share Posted October 1, 2016 rub the rusty are with oil and a bit of kitchen roll, the rust should lift and always rub the blued metal parts with and oily rag. Quote Link to comment Share on other sites More sharing options...
ASunnyD Posted October 1, 2016 Author Report Share Posted October 1, 2016 Cheers figgy! Quote Link to comment Share on other sites More sharing options...
johnbaz Posted October 7, 2016 Report Share Posted October 7, 2016 I use oil soaked wire wool, Depending on how bad the gun is, If it's a really good quality/condition gun i'll use the finest, Coarse wool for old munters!! Here's an old mk2 Airsporter that I had ten minutes on with coarse wool soaked with 3 in 1 oil End result.. Here's a Webley Hurricane I recently acquired.. Again, five minutes with the oily wool on the steel bits, I also fitted a rearsight and a foresight hood and polished the plastic/painted bits with a silicon impregnated shoe sghine sponge!! Managed to bag a cylinder shroud off the bay for £13.50 posted too!! John Quote Link to comment Share on other sites More sharing options...
ASunnyD Posted October 7, 2016 Author Report Share Posted October 7, 2016 Nice work! They've turned out beautiful, mines nowhere near that bad so I'm holding high hopes it should only be a couple of minutes work and a nice easy job. Just need to pick up some oil and il be sorted thanks john Quote Link to comment Share on other sites More sharing options...
johnbaz Posted October 7, 2016 Report Share Posted October 7, 2016 You'll probably need the finest wire wool, 0000 grade John Quote Link to comment Share on other sites More sharing options...
ASunnyD Posted October 8, 2016 Author Report Share Posted October 8, 2016 Thanks buddy, il pick some up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.