OGGIE Posted October 27, 2016 Report Share Posted October 27, 2016 Could anyone help please, I want to put a 13 mm butt pad on my gun. The dimensions are 135 mm long and 43.5 mm wide. I would really like one without any holes pre drilled though the hole centres are 80 mm apart centre to centre. I've searched high and low for one to (grind to fit is ok). Thanks, Alan. Quote Link to comment Share on other sites More sharing options...
Glenlivet Posted October 27, 2016 Report Share Posted October 27, 2016 What gun is it? Quote Link to comment Share on other sites More sharing options...
Greenhunter Posted October 27, 2016 Report Share Posted October 27, 2016 Never had any problem finding ones to fit any of my guns over a good number of years. They all seem to come pre-drilled. Even if they are it isn't a problem adding different holes and they won't show on the outside until you actually push the screws through the outer rubber. Also most are 'grind to fit' so there shouldn't really be a problem finding something suitable. There are plenty on that well known auction site, Avalon guns have a good range and do mail-order and there's loads of other gun shops on-line. GH Quote Link to comment Share on other sites More sharing options...
johnphilip Posted October 27, 2016 Report Share Posted October 27, 2016 Have you had a look at the ISIS butt pads, very good on reducing recoil, also quite easy to grind down with a belt sander, they are not cheap though. Quote Link to comment Share on other sites More sharing options...
Dougy Posted October 27, 2016 Report Share Posted October 27, 2016 I wanted one for a SakoS491 it was a bit rough looking so I looked at a straight swap but the price was just silly. GMK cost for a Sako butt pad was around £90... sourced one from Google for less than £20. Can't remember where from though. Quote Link to comment Share on other sites More sharing options...
OGGIE Posted October 27, 2016 Author Report Share Posted October 27, 2016 Glenlivet. It's on a Beretta 687 fitted with a Jones through the pad adjuster. Greenhunter. I want a solid pad not a rubber one with slit holes for the screws. Quote Link to comment Share on other sites More sharing options...
Glenlivet Posted October 27, 2016 Report Share Posted October 27, 2016 Glenlivet. It's on a Beretta 687 fitted with a Jones through the pad adjuster. Greenhunter. I want a solid pad not a rubber one with slit holes for the screws. Like this one?http://estore.beretta.com/en-eu/beretta-plastic-field-recoil-pad-for-12-ga/ I let one go with the Silver pig S I've just sold.. Quote Link to comment Share on other sites More sharing options...
OGGIE Posted October 28, 2016 Author Report Share Posted October 28, 2016 I have one of those which came off my gun when the Jones adjuster was fitted. It is not big enough. Thank you for your help, much appreciated. Alan. Quote Link to comment Share on other sites More sharing options...
Glenlivet Posted October 28, 2016 Report Share Posted October 28, 2016 This is for the competition guns which I'm pretty sure are bigger - http://estore.beretta.com/en-eu/beretta-oil-wood-competition-recoil-pad-for-12-ga/ Not cheap though! You could get one made for not too much money by a decent stock maker/finisher. Quote Link to comment Share on other sites More sharing options...
OGGIE Posted October 28, 2016 Author Report Share Posted October 28, 2016 Thank you. Quote Link to comment Share on other sites More sharing options...
Junkyard Dog Posted November 1, 2016 Report Share Posted November 1, 2016 £45 made to fit and finished.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.