bruno22rf Posted February 9, 2017 Report Share Posted February 9, 2017 (edited) Don't know if anyone has come up with this before but I have had problems with my rifle falling over while I'm out shooting - waiting for Squizzers can sometimes take an hour or so and the easiest thing I find to do with my rifle is lean it against a tree - but several times my gun has fallen over and then I have needed to disturb the peace by checking zero. After a little thought I tried putting an O ring over the silencer/mod, about 1/2" from the muzzle - get a thickish one with an I.D. about 2mm smaller than your silencer dia. and push/twist it on....problem solved the O ring almost sticks to the tree...so simple. Hope this is of some help to someone Edited February 9, 2017 by bruno22rf Quote Link to comment Share on other sites More sharing options...
Sha Bu Le Posted February 10, 2017 Report Share Posted February 10, 2017 Even simpler lie your gun on the ground on top of your gun slip, can't fall over then. Quote Link to comment Share on other sites More sharing options...
krugerandsmith Posted February 10, 2017 Report Share Posted February 10, 2017 Even simpler lie your gun on the ground on top of your gun slip, can't fall over then. You realist you. Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted February 10, 2017 Author Report Share Posted February 10, 2017 You obviously have not shot many squirrels....movement needs to be kept to a minimum when they appear 20 yards away. With the gun leaning on a tree in front of you it's easier to slide it into your shoulder and take the shot. Quote Link to comment Share on other sites More sharing options...
Sha Bu Le Posted February 11, 2017 Report Share Posted February 11, 2017 You obviously have not shot many squirrels....movement needs to be kept to a minimum when they appear 20 yards away. With the gun leaning on a tree in front of you it's easier to slide it into your shoulder and take the shot. No not many only about ten (T.O.O) so point conceded. Quote Link to comment Share on other sites More sharing options...
Longbower Posted February 11, 2017 Report Share Posted February 11, 2017 Bicycle inner tube , rolled down the silencer and 'trimmed' , makes a nice knock/scratch proof cover , that also stops it sliding and falling over. A one inch piece also makes a good " filling port" cover on HW100'S , Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted February 12, 2017 Author Report Share Posted February 12, 2017 Now that's a good idea Longbower. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.