pinfireman Posted February 15, 2017 Report Share Posted February 15, 2017 Does anyone have an data for Blue Dot? Other than the data from Alliant, which is only for USA hulls, wads and primers.............. Quote Link to comment Share on other sites More sharing options...
Continental Shooter Posted February 16, 2017 Report Share Posted February 16, 2017 http://www.alliantpowder.com/reloaders/powderlist.aspx?type=2&powderid=10&gauge=12 you got about 16 recipes with Fiocchi hulls and Fiocchi 616 primers ...these can also be adjusted for Cheddite hulls Wads wise, just chose any Gualandi and B&P with the right height for the pellets column. Then just pattern one with a B&P wad and one with a Gualandi and see which one pattern best taking into account Gualandi will raise pressure 40-60 bar more than B&P with the usual consequences on patterns. From there on you should be able to adjust loads to suit your need in all safety. Quote Link to comment Share on other sites More sharing options...
pinfireman Posted February 16, 2017 Author Report Share Posted February 16, 2017 Ok, thanks. I,ll work up a few loads.... Quote Link to comment Share on other sites More sharing options...
pestcontrol1 Posted February 17, 2017 Report Share Posted February 17, 2017 What load are you looking for ? i have a few Quote Link to comment Share on other sites More sharing options...
pinfireman Posted February 20, 2017 Author Report Share Posted February 20, 2017 What load are you looking for ? i have a few I,m looking for a variety of loads, having inherited quite a fair amount of Blue Dot Quote Link to comment Share on other sites More sharing options...
pestcontrol1 Posted February 22, 2017 Report Share Posted February 22, 2017 Drop me a pm (i can reply throw my phone laptop playing up) with what sort of loads you are after and i will have a look throw my data and books. Quote Link to comment Share on other sites More sharing options...
harkom Posted February 22, 2017 Report Share Posted February 22, 2017 Hi. I am looking for 16 bore ,2 3/4", 1 1/8 oz lead. Also looking for any input on BD for standard 4 bore (= 6 gauge) with 3 1/8 oz lead. Quote Link to comment Share on other sites More sharing options...
bishop Posted January 19, 2023 Report Share Posted January 19, 2023 On 22/02/2017 at 09:53, pestcontrol1 said: Drop me a pm (i can reply throw my phone laptop playing up) with what sort of loads you are after and i will have a look throw my data and books. Im in need of a few more blue dot loads for an older 3" gun here if you have any?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.