ditchman

if you rub a bit of oil on it....it will sooner than later rust up again.......just clean it and do as you are bloody told............. DO NOT USE THE OIL ON ANY PLASTIC....FURNISHINGS...ETC....AS WHEN IT DRYS YOU WONT GET IT OFF

WARNING..............once you clean to bare metal and coat the metal with boiled linseed oil.....you will never get it off when it hardens.....only way is to use oven cleaner...i use the oil on my engine and chassis...it is brilliant stuff and cheap...i also put it on my ali' casings...not the polished stuff tho' regards your robot ......i have been following you on different threads you know....and a pattern is begtinning to emerge

yeah should be fine....also get some VERY FINE EMERYPAPER....and flatten off both sides the thin washer..(that will make sure it dosnt weep)....electric wire brush the top...totally degrease it and if you dont want it to rust....coat it (thin coat) with BOILED LINSEED OIL........DONTTOUCH ANYTHING ELSE OR YOU WILL CHANGE THE PRESSURE SETTING ps.............flattern off the bleed back washers as well... are you going to use your injector on your sex robot...

orn yer bike pal

phone the sale room i surgested....see what they have to say ........................

ooohhhh god here we go...............................christ sake dont give him ideas...

masterclass as usual.................................put me totally to shame........

you joke about that...........there is a very "select" clay pigeon shooting club that meets the first sunday every month about a mile from here....none of them are "locals" (nfn's)....and they all turn up in plus 2 and 4's garters...ties...waistcoates.........as if they are shooting at sandringham.....me and my mate went along a few years ago and asked if we could join.....and was given an emphatic NO (with a look of "now just go away serf") the whole bloody lot of them are manual crankers of the first order.....you can see the shooting from the road AND IT IS AWFUL...

dont tell me........................ ....................its your next RE-BUILD.............

with all this "choppers an' knives an' stuff" going on in London...best start carrying a swordstick when i visit ..!

dont tell me..........yu driv it so quick h ome...it blew the stripes orf

she was a car crash and a danger to....................the way eamon broke the gun...reminded me very much of someone used to having "a stuffer"....wonder if he is a closet game shot ?

using "pump" action's were you ?

dc always makes me jump....it has a bigger ocv...anyway my set has ... nothing wrong with AC...dont think you will have "polarity" issues with it so much as DC

just watched a bit of it .....Holmes is used to handling a gun...(he kept that quiet).........

mobile knocking shop...............

dont watch it...............those crashes they have are terrible............i know how they feel when i used to come off my bike and have to "dig" the stones out of my hands and knees....graizes are soooo very painful....and they break bones as well..........just gives me the ebbeee-geebees watching it .........

its to do with the ammount of heat that goes into the metal or the rod......if you are welding a root for example ...you will be welding it with a 2.5mm rod and on negartive electrode...that way round 2/3 of the heat will go into the metal and 1/3 into the rod....then fill and cap with electrode positive some rods like a low heat ie you will burn them on negertive polarity....it will tell you on the pack with the other info...fracture strenght....position etc..... on an AC set....you are stuffed.....its fine tho' just have to adapt your technique....DC sets you can have in certain situations more control and have the ability to use specialist rods..

agree .....also start to spend more time out with binoculars....and learn the areas the birds favour...wind direction...and where you will set up...

cheers.....its just some rods like to be burnt dc + -..........it will say on the pack...........let us know how you get on...

you are going to have to come up with more than that ...if you are angling for a days shooting with him ..

like the weather vane

thats about it... ..... if you put any sort of fence up...it will be kicked in and burnt.....dont put a flowerbed as it will be difficult to prove who vandalised it......might be a good idea to put in a hidden trailcam.....

the cordless hedge trimmers are much better than they used to be ...all of what above says............i dont have one as i have at least 200m of hedge to do....and i have a cheep Aldi one.....which is main electric which i have modified..........

your welder ...is it ac ...or dc...?