beezer

If they're not vermin what are they?

Those foxes you ignore on the links will surely maroad local farms if you don't shoot them.

I used to run a car like that.

Thank's guys,I think based on your info I'll risk it. I have to be very careful how I eke out my pension. Who does the best deal?

Im thinking of puting a reflex on my 243 but I've heard that they rust out in a year. Has anyone experience of this?

Worth every peny.

what's a brooks kit and where do I get one?

I use an old franchi and I had this trouble a lot untill I found out the trouble. Now it fires anything over 30 g . Take off the barrel and at the end of the mag tobe is a plastic ring, running in a grove in this ring is a steel ring . Make sure that tha gaps where the rings join are in line. This allow's the barrel to recoil smoothly and the gun to cycle.

If you wanta quick fix for a jacket other than a barber what I used to do is rub a candle over it. Slightly warm the candle first. It doesn.t last a lifetime but it does if you need to go out in a hurry.

A wipe with an oily rag is the most lube the outside of your bolt need's.

I've just ordered a new rossi single in 243. Has anyone got one what are they like?

Tell me about the brooks kit!

I'm glad I'm not the only one. I was seriously thinking of buying a new scope.

What's the worst grouping anyones had with ammo' that didn't siut your barrel? I used different bullets on the range and got as much as three in's between holes with my 243.

I think just after first light on frosty mornings is the best time.

Just got home . Bought a nice gralocking knife and a bullet sleeve That fit's over the rifle stock. There were some good deals on 2n'd hand rifles. I didn't think it was so busy today and some stands seemed to be missing. Getting out was much easier this time.

Does anyone know where I can get a fac hammer spring for my s 200. Increasing the tension on the normal spring only gives me about 14 F't lbs.

rapidsteve I just noticed your add is for 223 mod'. I need 243 mod',

Rapidsteve I am very keen to buy I have all my riflles registered for sound mod's where are you? I'm in craven Arms.

I've just been let down on a deal over a wildcat modderetor for my 243. Has anyone out there got one they want to sell? I can't quite run to the price of a new one.

Thank's for the input fellas. It seems as though the bullet is not getting it's nose up and the whole thing jump's clear of the bolt base first. The extractor claw is a semicircular affair on the top of the bolt. I've taken it off and cleaned it.

hi guys I've given everything a thorough clean and it's improved a bit. Now only the first shell out jumps, 2&3 cycle OK. I guess I can manage with a 2 shot 'till I can afford a better.

can anyone sujest why my BSA 243 has started playing up? When I work the bolt to cycle another round sometimes the bullet misses the extractor and jumps out of the gun base first or the bolt catches the round amidships. I am useing it as a single shot at the moment.

:thumbs: I have just bought an air arms S200 . With this I get 60 - 70 shots per fill , ten shot magazine and same hole accuracy at 35 y'ds. for around £300. Why would I want to spend a fortune on another "named" gun for the same results? I had a superten and the only real advantage was more shot's per fill. It was a lot hevier to carry as well.

Thanks Dibbs . Nice gun. Beezer