-
Posts
757 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
PW Shop
Everything posted by majordisorder
-
If you draw a blank try People Per Hour. Some good guys on there, but you'll have to weed out the wannabees.
-
Well I got a bit confused with which bits came with this gun so when I checked this morning I realised I made a bit of a mistake. Here's what's included.... This Southern Gun Company V22 rifle is in good condition and comes complete with: 3 magazines, 1 x 10 shot plus 2 x 25 shot. Picatinny Riser Carry Handle / Rear Sight Magpul BUS The lower is a regular SGC AR15 lower and can also be used with .223 / 300 Blackout (and other) uppers. Fitted with a commercial buffer tube, CAA stock and A2 grip. I'll throw in a different Hogue pistol grip if wanted.
-
Have you considered a Modular Driven Technologies (MDT) chassis system? The LSS is a very lightweight base (1.6lbs) for putting together a custom stock configuration. Plug in any AR15 buttstock and pistol grip to give a look and feel to suit you.
-
I'll take this if you've still got it.
-
I don't have any pics personally but take a look here....
-
I've got a few Modular Driven Technologies LSS Chassis for sale, 1 * Remington 700 R/H Black and 3 * Tikka T3 R/H Black (both short action). They are available for £320 each (chassis only). If you wanted a complete, ready to shoot setup with collapsible butt stock, grip, (MDT) compatible AICS magazine, castle nut and receiver extension tube like in the photo below it's available at £460 These are amazingly light and sturdy and becoming quite popular.
-
Lot 7 please
-
MTC Viper 4-16 x 50 IR + A.R.M.S 30mm one piece mounts
majordisorder replied to majordisorder's topic in Other Sales
MTC Sold. Set of ARMS mounts to go. £100 posted. -
MTC Viper 4-16 x 50 IR + A.R.M.S 30mm one piece mounts
majordisorder replied to majordisorder's topic in Other Sales
MTC scope sold pending. -
Selling my Viper, excellent / mint condition, full spec here. - £185.00 posted Also got a set of Q/R 30mm A.R.M.S mounts excellent condition - £105 posted A.R.M.S.® #35™ High Rings 30mm Track Mounting Rings that attach to A.R.M.S.® rail foundations that have stainless steel helicoil threaded holes embedded into the center channel of the rail between the Mil-Spec dovetail rails, allowing perfect solid alignment. 100% MADE IN THE USA. Height: 1.50" (Measured from the center of the optic to the top of the rail if mounted on a Sleeve Rail. If mounted to a #35QD, the height is 1.81".)
-
What make / model is it?
-
Which model?
-
Bump. £75?
-
If you can't be doing with running round after your chickens morning and night then you'll want this. The light sensor opens the door in the morning and closes at night. The sliding door is 22cm wide * 33cm high. Cost over £130, delivered to your door for £85.
-
So I've just imported a load of accessories / tools via USPS and I've been notified by them that it's in the "Customs clearance" process (I think at Heathrow). How long is this likely to take till I get the goods?
-
Selling up - Rifle & reloading related stuff
majordisorder replied to Browning's topic in Other Sales
Target Master please -
Finding out who's just hit and run on my car...
majordisorder replied to majordisorder's topic in Off Topic
Ah, good idea, I'll track one down. Just a majorly scuffed bumper, thing is I'm pretty certain from my detective work so far that it's someone in my village but there are a load of similar colour cars. It's beyond a polish job though.... -
Is there a commercial service available to find the make / model / year of car from a bit of paint? Some has just hit my car and driven off leaving a nice smear of greeny / blue paint behind.
-
Lee Enfield No4 Mk1 .410 Conversion & Ejector Issues
majordisorder replied to Mikeshudson's topic in Guns & Equipment
Should be like this .... -
Taurus Revolver - Reduced Power Trigger Spring Kit
majordisorder replied to majordisorder's topic in Other Sales
These will work with Taurus .357 & .44 LBRs Installation should take around 5 - 10 minutes, there's a few videos on youtube, like this one (https://www.youtube.com/watch?v=tzGsxy8sEx8) about how to do it. As with any tinkering with guns and triggers you should test it for function after installing -
This pack contains 1 each of 10, 11 and 12 pound reduced power hammer springs for Taurus revolvers and 1 each 10 and 11 pound reduced power trigger return springs allowing adjustment for lighter and smoother trigger and hammer action. £15 posted.
-
Still got these if anyone's interested?
-
Lee Pro 1000 #2 Shell plate carrier+ large primer attachment
majordisorder replied to majordisorder's topic in Wanted
Now sorted, thanks