NIGHT SEARCHER

Have a look on YOU TUBE loads of vids on the cheap pumps and rebuilding them. Aliexpress.com had an offer on them £23.00 free p&p. All staineless steel. Last week.

To everyone asking about getting parts. ALIEXPRESS.COM Do a full range of parts from gaskets. O rings. to Pistons. All very cheap. I am thinking of getting one. I have two Cylinders that are both out of date now. And need Hydraulic testing and filling so there will be no change out of £100 thats half the price of a 300 bar Compressor. Theres loads of vids on YOU TUBE on rebuilding and using them. Has someone as already said keeping then cool is the best like using ice water to keep it cool.

The early Walther RM8 is an Unregulated Rifle and will have a sweet spot where it shoots at full power. The spec on the Riflle is 150 shots in .177 and 170 shots in .22 from a 232 bar fill. But you will get around 80 to 100 shots at full power.You need to find the Rifles sweet spot. (ie) What power is it shooting at what Bar. I have a few Unregulated Rifles Logun Pro. Daystate Huntsman. Falcon FN19. All say fill to 200 bar. At 200 Bar they are well down on power. The Logun at 200 bar is shooting at 6.5 Ft lb. 190 Bar =8.7 ft lb. 180 Bar =10. ft lb 170 bar down to 80 Bar it shoots at 11.7 ft lb. So the sweet spot is 170 down to 80 Bar. You can have a Regulator fitted so all your shots are at the same power. You could do with a cheap Chronograph around £40 to check it`s power at what Bar. I have just been reading that since early 2017 That Walther have been fitting a regulator to the RM 8 has standard to get rid of a power curve sweet spot problem. Good luck. Russ.

It looks like a TITAN MCO 10. To me. Titan the Company was bought out by Falcon to get there hands on Titan Gunsmiths designs. Falcon renamed the Titan MCO 10 to the Falcon FN19. The gun was outstanding and still is. It did very well in HFT and FT has it was so accurate. You will find it deadly accurate and get around 70 to 80 full power shots out of a 200 bar fill. I still have one in .22. I have had it over 25 years and is fitted with night vision for Ratting. Love the gun and would never part with it. Mc Avoys Gunsmiths Standish. Had a Titan MCO10 in FAC doing 25 ft lbs for £250 i was very tempted.

I WILL SECOND THAT. There was a second hand one going a few weeks ago. Rifle & Bag & 3x9x50 scope & Bottle. £350. Bargain.

I used to deliver for Europarts and i dropped that stuff of at a few Garages. Around £25 to £30 a bottle. I asked a few of them weeks later if it worked. And they all said Surprisingly YES.

What make is the pump. How old is it. And what is it`s top Bar or PSI. Where abouts are you. Any idea how much it is to post it.

Aldi are selling 2.5kg bag of dog biscuits like chum mixer for 79p. Great floaters for surface fishing for Carp.

Just a heads up Aldi are doing 2.5kg of Dog biscuits for 79p. Great floaters for carp.

Have a look on Gumtree. Manchester but may post. Put on today. Stainless Steel Lug Worm Rag Worm Bait pump mint cont. Gumtree Add Number 1184095098. Tel Number 07899034802.

There`s a bargain on Ebay at the moment 86 left. Ebay item number 291154318956. Expander pellet pump. You get 2 x Vacuum Containers 1 x 400ml. 1 x 700ml. 1 x Pump. For £3.99. Free p&p I use mine for Expander pellets. Boilies. And small feeder pellets. And sucking extra flavour into the pellets. All the vac pump dose is suck some air out of the pellets and pull water or flavour into the pellets so they sink. This makes them softer so you can hook them direct. Or Hair Rig them. I use pellet bands a lot. Better Presentation. I have just seen some of your old post and what you are looking for is a suction pump for sandworms ect. For sea fishing bait. They are like a bike pump. Stainless steel is the best but expensive. The problem is every time you suck a sandworm up you suck a load of sand up has well. Very abrasive and will damage seals. You have to keep washing the pump out with water to try and wash the sand out. Tight lines.

What a bargain.

Have a look on Youtube. There`s loads on there catching carp with fly`s. Fly fishing for carp. Tying a bread fly like floating bread using white foam. Very easy fly to make. Great fun catching carp with a fly rod.

I use .25 cal for Ratting. Very hard hitting stops them dead. Excellent for close range work. There`s loads of .25 cal pellets now. I have .22 and .177 as well but for barns and pig pens i like the .25 cal best. .25 Cal do drop of badly after 30 yds. RWS are doing Hollow points. Superdomes. Pointed. Have a look at. www.airgunpellet.co.uk www.pelletperfect.co.uk

All you need is a 12v 500mA trickle charger loads on ebay for £5.00. If the battery is flat 12V - 7AH 14 hour charge. ie 2 hours charge per AH.

Call in a pound shop there`s lots of small zip pouches for ear phones. I got one with slots on the back for putting on your belt and hold around 200 pellets. There`s lots on YOU TUBE were you make your own out of an old welly and punch 50 holes in it and hang it round your neck. I think the it was Hunters Vermin vids that it was on. Or Vermin hunters. It`s a long time ago. Diabetic strip containers are very similar to 35mm film containers i have both being an old ****.

Yes there`s lots on ebay or Toolstaton do lots of batterys. Standed lamp battery 12V -7 Ah £14.98 inc vat and delivered.

I am in a number of Fishing clubs. Around 25 ponds in all and they are all fed by land drains from the surrounding fields. Some of the land drains have been put in by the fishing clubs and some with the help from Farmers with a mini digger. You just need to rod them to keep them clear every few years. It`s surprising how quick a pond fills up. You can have water delivered by tanker if you need to. The best thing about land drains is half a dozen pipes running water in to your pond about two or three foot above your water line will keep the water well oxygenated. And you get lot`s of nutrients from the fields running into your pond. What are you thinking of stocking. Carp. Bream. Rudd. Roach. Tench. Would be fine. Good Luck.

T W Chambers or www.gunspares.co.uk same firm. £31.40 for a full strip and rebuild seal kit. You could give Arther Branthwaite gun smiths a bell. 0161 485 1199. He has always been fair with me. The most i have paid for a repair is £45.00. Hope this helps Russ.

+2 +1

Have a look at. www.pelletperfrct.co.uk Lots of pellets to try sample packs.

Try Sandwell Field Sports at Dudley I have always and excellent service from them. Lots of seal kits on Ebay. From £4.50 to £6.90. Or Chambers AKA gunspares. for an exploded view of your gun. They sell the seals individually. www.gunspares.co.uk

Filler pipe or whip about £10 to £15 depends on length loads on Ebay. Filler probe for an hatsan AT 44 £12 to £17 again loads on Ebay. Or you can get both from best fittings at a reasonable price. www.best-fittings.co.uk Probe £15.00 Micro bore fill Pipe £17.50

Sounds like it is in 4 wheel drive. 17 mpg would be about right. Make sure it is in two wheel drive high range and you should get around 24 to 27 mpg.