Jump to content

matone

Members
 View Profile  See their activity

  • Posts

    3,606

  • Joined

  • Last visited

 Content Type 

Everything posted by matone

  1. matone
    Its good that they do it,but we should expect nothing less given the amount we pay for our gear really !
  2. matone
    It must be VERY loose on the bites ! Usually Miroku`s fail to fire the 2nd barrel due to this but for the action to open is something that I have never come across with a Miroku/Browning. Definitely one for the vendor to correct,good luck !
  3. matone
    Ended up using them exclusively in my CZ 425,seemed very consistent velocity wise,good accuracy too.
  4. matone
    There`s a link to H B Saddlery Repairs on the Justcartridges website .
  5. matone
    Northallerton Shooting & Country have a 2nd hand stock and a pair of barrels listed,sounds like they`ve broken one up,so could be worth an ask . Hth.
  6. matone
    +1 used nothing other than Lee Loader for .222,.22/250 and .243 for many years,always had superb results.I do use a primer tool and measure powder charge on scales though. A very simple cost effective bit of kit.
  7. matone
    Used a pair of Nikon 10x40,very good glass for the money !
  8. matone
    Bang on ! We`re struggling to help ourselves,never mind anyone else . It`s ridiculous the amount we give to the likes of India for one.They`re buying up our companies ***
  9. matone
    +1 for 40gr v-max. I use Hodgdon H-4198,it seems to produce best velocity in this loading.
  10. matone
    As I said,seen this many times,batteries can test within limits but just not up to the job on cold days ! At least it`s a relatively cheap fix !
  11. matone
    I`ve seen a lot of these problems cured by a new battery,despite the old battery testing out o.k.I`d try another battery 1st !
  12. matone
    All of the CZ triggers that I`ve seen have looked like investment cast material,I guess they`ll just snap,even with heat applied. Have a look at the Timney replacements,they might be what you`re after!
  13. matone
    Have a little patience and I think you`ll find that the mods will be a `bit flexible` as they have indicated. It`s down to showing yourself to be actively interested in the forum I guess.
  14. matone
    Another satisfied customer here ! Always had great service from Cluson`s Good products that are designed to be kept going for a long service life.
  15. matone
    Quite a few are sold on Ebay too.Have a look in `completed items`.
  16. matone
    +1 for the Lee Classic loader.Simple but very effective and all that most people would really need !
  17. matone
    No 3 magnums have 28,29 0r 30" barrels,Super Solways have 32"
  18. matone
    Read op !
  19. matone
    I would just view it in the same way as car servicing,you don`t really expect that to add value to a car,you just get it done.
  20. matone
    Doesn`t seem out of the way for full re-jointing
  21. matone
    You have to learn to rely on your hand/eye co-ordination,any other method such as calculating lead is going to fail you with some targets ! It is just a case of experience and practicing.
  22. matone
    Found exactly the same re heel rubbing with Muck boots,I think it`s because they grip your calves rather than fitting the foot.Have Derwents and find them deadly on mossy wet upland ground too,relegated mine to be work wellies. Le Chameaus are the most comfortable wellies that I`ve had.
  23. matone
    I`ve had a couple of pairs of Hi-tech boots,great value knockabout boots but wouldn`t recommend them as a serious walking boot.
  24. matone
    Bought a Teague extended mobil for my A303,works fine.
  25. matone
    It all depends on the originality and condition that the gun is in now really.
×
×
  • Create New...