pestcontrol1

Is there anyone who has got or knows what choke thread bettinsoli are using on there new 410s please

I proofed it when the psb2 changed to what we are using now cracking load took plenty of duck am geese with it

Hi Rick yer thought it may have been m8 hope your still doing a bit down there m8

Drop me a pm plz I am interested live ten mins from your shoot an ex keeper cheers

I would be interested if you could put my name down plz

But how many of you use the powder an have noticed that the batch number changed and so did the powder ?? Most of the loads on clay game sheets for this stuff is over pressure and some is not this powders data

Yep 40gm done with psb2 ( proofed nice )

Did these go ?

Ssb makes a couple nice steel loads in the 20 70mm an 76mm

Are you on 20 bore ?

Vp53 m8

Not had s problem with them yet only choke damage ripping the gas seal off. What choke and load are you using Motty what choke are you using m8 I have just one to kicks in the bps but the Lincoln loves sam1 slit 3 ways

Told ya it works it's all I used out the auto for a while on pigeons can get a bit lumpy out the game gun thou. You may have found that out on the clays thou m8.

616 primer 14gn csb5 4mm nitro 24mm felt 21gm lead. That's the load that was on fes site cheap cheerful brakes clays sometimes ?

Steel will kill if you do your part the right shot size speed an choke plays a big part in the matter. The only thing I shoot with more then 30gm of steel shot is fowling most of the time it's 24gm 28gm 30gm home loads shot throw after market choke and they will kill pigeons dead in the air as far out as you want to shoot them. Yes you will get the odd bird fly off hit hard an drop 100 yards away even with lead you get that. That last week I shot with Agaman had a cracking afternoon shot nowt but steel missed a few but the 28gm an 30gm 3s was killing pigeons pasted 50 yards dead as a knit 4s also work a gives you a few more pellets in the pattern but the 3s do everything I want them to do pigeons crows duck even a few foxes just use bigger stuff for the geese. I would say if your using an auto and want to shoot steel seriously spend a few quid on a kicks xfull choke an if your not making your own cartridges buy a box of most brands an pattern them throw your gun with said gun and go from there. The kicks xfull is good with steel from 30/50 yards an more it chucks a good tight an even pattern

IL be ******** if I know what iv done to let it post ?

God knows if this will work not been able to post for ages. Yep a big thanks to the one an only Aagman had a cracking few hours in the hide with you m8 had a good chin wag in-between the pigeons an bangs glad I pulled my finger out an found them eventually an glad I could show you what steel can really do when you can hit um ?.

If your on face book join uk cartridge reloading i will put you intouch with a lad that makes them

27gm load with lil gun works a treat on duck and geese.

only shot the oz load a couple of times i stuck with the 24gm load fliping it between plas an fibre wad it shot great

70mm pt hull cx2000 21gn csb5 3mm nitro+ fibre 28gm lead crimp 1324 fps 597 bar 70mm pt hull cx2000 23gn csb5 3mm nitro + fibre 28gm lead 1436 fps 668 bar

What clay stuff are you after Graham !!

Use the same or motty I do 10 12 20 with the same one

I have just finished the last of my factory 21gm an 24gm cartridges in the 20 bore and looking for a load probably 24gm to start loading up. I shot some 30gm an 32gm on game last season yes they kill but every time they hit i cringe talk about pillow cased but are good on high birds. But i will stick to a nice 24gm load i think

Hi Clive You must be near to John at fes are you. Im not to far about 15 min drive from clay an game but he only has the new psb2 in stock not the old stuff i will be ordering some cases from siarm i would think at some point but will probably get 2-300 from up the road to get me started