hakapiken
Members-
Posts
47 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
PW Shop
Everything posted by hakapiken
-
Article on Fibre versus Plastic
hakapiken replied to JohnfromUK's topic in Bullets, Cartridges and Reloading
Continental Shooter ππ»ππ»π J.A. -
Here is data from Guilandi's site. HI-SKOR 800-X (Du Pont - USA) GAUGE CASE PRIMER GRAMS OF POWDER GRAMS OF SHOTS CRIMPING 12/76 PLASTIC 615/CX MIL 1,90/2,00 ==== 50 STAR J.A.
-
I am using this element and A Rex c100 PID controller. https://youtu.be/lZI_l--JdNM
-
PIGEON CARTRIDGE WITH LONGSHOT
hakapiken replied to 7albert's topic in Bullets, Cartridges and Reloading
Sorry!! The load is 12/70 6-point crimp to 58mm total catridge length with A gaep bn2 spinner.π Of you take a look at the Guilandi webside or Nobel Sport webside you Will find good loads with the Vectan AS, A1and A0. With Vihtavuori powder my favourite grouse-load is N320 1,65g powder, 33g lead 6 sg22 or z2m21 wad. J.A. -
PIGEON CARTRIDGE WITH LONGSHOT
hakapiken replied to 7albert's topic in Bullets, Cartridges and Reloading
Longshot powder is best for Heavy loads, 36-38g loads. I think it is overkill for pigeons..... But I have one good load if you can live with the recoil: Cx2000 primer, cheddite once fired hulls, 2 grammes of powder , 38 grammes of leadshot 5 og 6 in a z2m21 wad. 430 ms, 850 Bar pressure. You need a shotgun proofed to magnum pressure (1050 bar service pressure )!! J.A. -
6,5x55!!! I am using it for everything from grouse to moose. J.A.
-
Hi, take A look at this. J.A.
-
Buy direct. Send A Mail to omv-metal@libero.it
-
Pure antifreeze. J.A.
-
The OMV smart i best for new hulls. You will also need a something to to dropp powder and shot. Some of my swedish friens have this kind of press and they are very satisfied With the results. Perfect crimps and uniform cartridge length every time. I use a Mec 600 and have a Gaep BN2 in a adjustable drill press for finishing at correct lengt. I find this Works great with once fired hulls. J.A.
-
Here is my homemade shotmaker. PID controll and 2000w boiling ring for heating. 0.8mm drippers making perfect 6 shot (4% antimony). https://youtu.be/lZI_l--JdNM J.A.
-
Grams
-
Trying to Decide on Powder
hakapiken replied to neutron619's topic in Bullets, Cartridges and Reloading
In Norway 800x is one of the cheapest powders for shotgun at Β£30/lbs J.A. -
Trying to Decide on Powder
hakapiken replied to neutron619's topic in Bullets, Cartridges and Reloading
Hi. Have you tried IMR 800x. Wonderfull powder for 34-37g loads, patterns well and soft recoil. IT is A duble base powder and performs very good in cold weather. J.A. -
Gamebore must be wasting A lot of A0 on Pigeon Extreme then..... for A reason I think. J.A.
-
GB = Gamebore J.A.
-
Yes, IT is a lot of powder. A swedish frend opened up A cartridge to find out. The speed is ca 410 ms. I don'n know about pressure, but I assume GB are within CIP standards. GB are buying powder in bulk. Comercial A0 powder may not be exactly the same.... J.A.
-
Take A look inside GB Pigeon extreme. A0 1,95g, 34g 5 shot and z2m18 wad.... More like a "controdose". J.A.
-
Hi Anyone got a good proven recipe for between 34-36 gram lead loads with this powder?? I'm using once fired cheddite hulls. Also want recipes using Lovex S030. Lovex (Explosia) only list Remington and S&B hulls...... J.A.
-
If you could design your own game cartridge.
hakapiken replied to Salop Matt's topic in Bullets, Cartridges and Reloading
12/70 cheddite once fired hull (from the clayground) win 209 primer 1,65 grams of VV N320 Guilandi sg 22 wad or B&P z2m21 With a felt wad in the bottom. (Split the petals) 32 grams of 2,7 mm lead crimp at 58mm 6 star 1345fps -
Gamebore 12g pre primed hulls.
hakapiken replied to Styla247's topic in Bullets, Cartridges and Reloading
Gamebore uses a lot of cx2000 primers. Look inside the shell. If the top of the primer is marked black, then it is probably cx2000. The cx2000 is ranked as a hot primer, but not as hot as the amerikan magnum types. Regards Jan Arne