Jump to content

pg339

Members
  • Posts

    127
  • Joined

  • Last visited

Everything posted by pg339

  1. Should have said it's the sporter barrel not the varmint.
  2. I'm looking for a CZ452 walnut stock for my 17hmr American, not the 22lr version. Must be in good condition and free from dents or scratches. I have a spotless synthetic stock which I would swap if someone wanted to change theirs. Let me know if you have one to sell or swap. Thanks.
  3. Just be sure to order the right stock. I believe Boyd's website has a good step by step guide by 452 model. The 2 action screws and no barrel lug is the American model.
  4. Hi I have a pair of Leupold QRW steel weaver bases for the T Bolt. Don't know if they're any good to you or not. They came with a set of Leupold QRW rings that I bought, but I don't have a T Bolt.
  5. 2 mags sold to @beatie 1 still available.
  6. I'll do 2 for £56 posted.
  7. I have 3 steel 5 round mags for sale. These fit all CZ/Brno 22lr rifles. Currently £42 plus postage at Riflemags so £30 each posted. £80 posted for the 3.
  8. 1. Warne Maxima PA 30mm High £40 posted. 2. Sportsmatch 30mm medium £20 posted. 3. Genuine CZ 1" medium £30 posted. 4. Gloss 1" mediums marked Australia, seem same as Hillver, £30 posted.
  9. Yes those are for Tikka/Brno dovetails.
  10. Thanks for reply, unfortunately I need them for a rimfire 11mm dovetail.
  11. As above if anyone has a set to sell. Many thanks.
  12. Have a set there with recoil pin. £25 posted if any good.
  13. What height are you looking?
  14. As above. If the issue is only with the first round from a 10 round mag. Only loading 9 should sort it. If the issue is with more than the first round then they may not be seating in the mag at the correct angle for the bullet nose to enter the chamber when the bolt is closed. Make sure the magazine is clean and the spring and follower are operating smoothly. Insert a loaded mag (with safety in mind) and with the bolt to the rear visually check the position of the bullet nose. Slowly close the bolt watching where the nose is going. If not entering the chamber cleanly a small tweak of the magazine lips should fix the problem. Now, anyone got a couple to sell 🤣
  15. As above, looking for a couple of 22lr mags if anyone has them to sell. Many thanks.
  16. As above 0 moa. Bought to fit an Arken Zulus which I have since moved on. In excellent condition. £70 posted. See link below. Alan Rhone Store
  17. pg339

    Erma M1 .22 LR

    Look back on TSD, there was a chap had some for sale about a month or so ago.
  18. Yes try those bsa ultra mounts. Your 452 17hmr actually has an American 3/8" dovetail. This dovetail is measured at the bottom, not the top of the dovetail as is the case with European 11mm dovetails. The American should measure a fraction over 12mm across the top. The 13mm mounts should fit.
  19. Sportsmatch 13mm mounts fit perfectly on my 452 American 17hmr. https://www.sportsmatch-uk.com/13mm-dovetail-range-for-13mm-dovetails-e-g-most-modern-bsa-air-rifles-and-early-weihrauch-hw35-includes-easyfit-arrestor-pin
  20. Bought by myself from Optics Warehouse in February this year. 30mm tube and illuminated 4As reticle. Side Focus down to 10m. In immaculate as new condition in box with paperwork. £450 delivered.
  21. Looking for a 22lr 10 shot magazine for an original Walther PP pistol (not PPK) Maybe someone has one they no longer need.
×
×
  • Create New...