Jump to content

The Verminhater

Members
  • Posts

    30
  • Joined

  • Last visited

Everything posted by The Verminhater

  1. Fine thanks Beagler. It took five shims at the rear,plus one behind the front screw. Reticule not quite central, but acceptable. Great bit of kit though. I fitted a front lens cap cover and side focus lever which also helps. Sometimes I fit a 5"HD screen which also works perfectly with it.👍
  2. Just had another look at Brocock Commander xr retailers. They all state the moderator and picatinny/ weaver rails are extra (on top of their £1,000+ rifle). That makes it a big NO from me. Taking the p**** big time.
  3. It will shoot rats for me just as good as a cheaper pcp. I do like the compact design and lightweight of the Brocock Commander xr though. My Customiz3d HW 77k springer is a hefty beast with the pard 008p and 5.5" monitor attached.
  4. Are they regulated? Looking at one myself. However, Brocock have a descent regulated commander xr around the same price.
  5. Yes, I need a rock steady shooting platform for the rats (and the odd pigeon that flies inside the sheds). 👍
  6. Nice to know it works. Once the saddle arrives, I can set it up and re zero the pard 008p, as it's a rock steady platform. Then I'll attach the monitor. Happy days. 🤗
  7. Hi all, Having just purchased the Primos Gen 3 tripod, I decided to alter it giving me the flexibility to shoot rats in the farm sheds that are not only on ground level, but higher up on the sheds parallel structural beams that run all around the at different heights. The ball head mount will allow flexibility of movement, whilst the saddle clamp will lock the rifle stock securely. Just waiting for the N8vision saddle clamp to arrive.
  8. 1972, U.S withdrawal from Vietnam leaving the people to suffer under a N. Vietnam takeover. History repeating itself. The taliban knew (thanks to the world media), troops were pulling out). Taliban were just abiding their time before moving back in). Now they can reorganize for more terror attacks on the west, as we're not denying them freedom of movement anymore.
  9. Sonetimes you have to take the fight to the enemy. Sonetimes you have to take the fight to the enemy.
  10. Will do. Thanks. 👍
  11. Two shims at the back seemed to of worked. Went shooting last night, and the NV seems grainy, just wondering if it's connected to the ev setting?
  12. Changed my licence 6 months ago after moving house. Got it back 2 days later. DVLA 👍
  13. 2nd shim added, so will check again tommorow. Lucky my next door neighbour owns a field 2 miles down the road I can use to zero on, otherwise I would be 😡
  14. The ZB mount can be mounted either way. I mounted it this way to make it easier to rotate the turrets without stretching. I'll try another shim. However, the ZB instructions state you can loosen the elevation screw (at rear) to allow more.
  15. Many thanks for your help Rewulf. Just got in, so I'll read your post. 👍👍
  16. Also, the ZB mounting brackets only fit onto the Eaglevision rail, and with the pard on top adds the additional height you mentioned. The ZB mounts won't fit directky to my HW 77k dovetail. Try DashGo via Android app store.
  17. Also, the ZB mounting brackets only fit onto the Eaglevision rail, and with the pard on top adds the additional height you mentioned. The ZB mounts won't fit directly to my HW 77k dovetail.
  18. Thanks, I'll also check that out. The Instructions that came with it are useless. Just made these in case I need more. I knew my paper punch woukd eventually get some use. Made four in total. 🤣
  19. Messed about with the ZB mount so much, I can't remember tbh. Yes, probably too much height. I also restored the pard to factory settings, as previous owner had various settings for different rifles. Thought it best to start from scratch. I'll have a go today and see how it goes. How do I measure the scope line off the bore line?
  20. Thanks, I'll also check that out. The Instructions that came with it are useless.
  21. I've a ZB mount which when mounted, always on adjusting the turrets went to the maximum, and still left me around 2" off centre of my aiming point. Shame nobody within striking distance of the HU12 area has one who could help. 😭 I've added one shim, then I'll see how I get on, then add the ZB mount again and try once more. My setup is a (customised) HW 77k .22 springer with a 6" Eaglevision picatinny / weaver to dovetail standard rail, with the Pard 008p mounted with one rear shim....so far. Agreed. Thanks, I'll also check that out. The Instructions that came with it are useless.
  22. I'll have a go later, (the wife keeps finding me jobs to do)!!
×
×
  • Create New...