Jump to content

tax exempt land rover series 109 project


bigchap
 Share

Recommended Posts

land rover series 3 109,needs wiring loom fitting which i have,needs front seats,could do with new front springs.bulkhead is good,chassis has been patched but is ok.has new footwells,new underwing splashguards,new steering box cover,new radiator and new steering relay.it has a rebuilt v8 from a rover p5b fitted which was done by the previous owner,he told me the brakes have been fully overhauled as well.i only ran it once which was about 2 years ago but turn it over monthly to pump some oil round.

i fitted wolf doortops which cost me £160 secondhand,i have some 110 seats to fit in the rear.it was first registered in november 1971 and is chassis number 243 so is a very early series 3.i don't have the v5 and nor did the previous owner but i have the number plates and it's still on the dvla computer so it's just a matter of applying for it.a full receipt will be given.don't expect to jump in it and drive away because it's not running at the moment and don't expect a minter either,it will obviously need trailering or put on a dolly.someone with more enthusiasm than me could get it done in a fortnight easily.

i would like £350 for it,no swaps for anything though unless it's a mint aa prosport in .177! pic shows it without sills but these are in the back.

as you can see a tosh over with some paint wouldn't hurt it either!

it has no normal s3 heater fitted because i have an arctic heater for it which i never fitted,this will obviously come with it,i also have some new seat squabs which i believe are for a series 1 which i'll chuck in so you can get some money back off of that auction site.

post-21222-1275948699.jpg

Edited by bigchap
Link to comment
Share on other sites

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...