Jump to content

Crosman Accupell .22


Steve'o
 Share

Recommended Posts

Trying out tin Crosman Accupells .22 in my AA TX200 HC

 

Very tight fit and not that accurate at 30yrds using about 50 pellets

 

Got and and decided to sort them and found out of the 450 left that

 

120 had an seam running from the top to bottom all around pellet.

 

None were squashed,,

 

This seems a lot of waste.

 

Anybody else had this problem?

 

Will stick to AA or JSB in future.

Link to comment
Share on other sites

This seam looks like a thin 0.5mm - 0.75mm seam like the mould was dirty

and did not seal tightly.

 

rest of the pellets are clean :lol:

 

 

Just tried in my HW35K they seem to fit ok in this.

 

I used accupells when i had my hw 90, i think its normal to have that seam running along them if i remember rightly, that is the design :huh: i may be wrong thou as it was a few years ago

 

 

More like a flange than a seam.

Link to comment
Share on other sites

Iv never had any problems with accupells and i thinks its nothing to worry about :good: Remeber different pellets suit different rifles,i think its worth trying different pellets.

 

 

Will :unsure:

120 pellets their not a diff size they have a large flang of swarf that i could cut off with a knife.

 

the remaining pellet shoot ok and are accurate, i was just saying 120 deformed pellets is a lot of waste?

Link to comment
Share on other sites

I dont like/use Accupell anymore. They are a rip off, there quality is getting worse, and they are USA made.

 

I use Logun Penetrators (veery expensive) but they are very consitantly made, and dont damage easily. They come in a protected box, wrapped in a small plastic pouch, and are clean and shiny with no swarf, barely a mould seam line, and they kill every time. Well done to the people that designed them. Im sure different models will come out to suit other guns in time.. but I find them to be the most efficiant hunting pellet I have used yet.. despite they do not fire well in certain guns..

 

I used to love Accupell untill I tried Webly Lazadome, and AA Diabolo field (though these are often easily damaged, or come damaged)

Link to comment
Share on other sites

I dont like/use Accupell anymore. They are a rip off, there quality is getting worse, and they are USA made.

 

I use Logun Penetrators (veery expensive) but they are very consitantly made, and dont damage easily. They come in a protected box, wrapped in a small plastic pouch, and are clean and shiny with no swarf, barely a mould seam line, and they kill every time. Well done to the people that designed them. Im sure different models will come out to suit other guns in time.. but I find them to be the most efficiant hunting pellet I have used yet.. despite they do not fire well in certain guns..

 

I used to love Accupell untill I tried Webly Lazadome, and AA Diabolo field (though these are often easily damaged, or come damaged)

What cal do u use and in what rifle?

Link to comment
Share on other sites

I dont like/use Accupell anymore. They are a rip off, there quality is getting worse, and they are USA made.

 

I use Logun Penetrators (veery expensive) but they are very consitantly made, and dont damage easily. They come in a protected box, wrapped in a small plastic pouch, and are clean and shiny with no swarf, barely a mould seam line, and they kill every time. Well done to the people that designed them. Im sure different models will come out to suit other guns in time.. but I find them to be the most efficiant hunting pellet I have used yet.. despite they do not fire well in certain guns..

 

I used to love Accupell untill I tried Webly Lazadome, and AA Diabolo field (though these are often easily damaged, or come damaged)

What cal do u use and in what rifle?

 

i use accupells, shoot fine in the hw77, hit hard enough, seem to be very consistant, very few damaged ones in the few tins ive been through. But then airguns arnt really my thing, i just shoot rats with them not alot else, so i can tay ive tested accuracy at 50yards etc...

Link to comment
Share on other sites

accupell.jpg

Trying out tin Crosman Accupells .22 in my AA TX200 HC

 

Very tight fit and not that accurate at 30yrds using about 50 pellets

 

Got and and decided to sort them and found out of the 450 left that

 

120 had an seam running from the top to bottom all around pellet.

 

None were squashed,,

 

This seems a lot of waste.

 

Anybody else had this problem?

 

Will stick to AA or JSB in future.

 

 

accupell.jpg

Link to comment
Share on other sites

:rolleyes: QUOTE(Steve'o @ Apr 23 2006, 04:02 PM)

 

Trying out tin Crosman Accupells .22 in my AA TX200 HC

 

Very tight fit and not that accurate at 30yrds using about 50 pellets

 

Got and and decided to sort them and found out of the 450 left that

 

120 had an seam running from the top to bottom all around pellet.

 

None were squashed,,

 

This seems a lot of waste.

 

Anybody else had this problem?

 

Will stick to AA or JSB in future. :o

 

 

??? i see what you mean, not good! :yes:

 

 

 

 

--------------------

Link to comment
Share on other sites

Trying out tin Crosman Accupells .22 in my AA TX200 HC

 

Very tight fit and not that accurate at 30yrds using about 50 pellets

 

Got and and decided to sort them and found out of the 450 left that

 

120 had an seam running from the top to bottom all around pellet.

 

None were squashed,,

 

This seems a lot of waste.

 

Anybody else had this problem?

 

Will stick to AA or JSB in future.

Just looked at the photograph and basically the quality control at manufacture as failed BADLEY ??? ......I use these pellets at FAC powers and they are good and I reccomend you returning them and getting a replacement Tin .................You could end up regretting not giving them a second chance :rolleyes:

Link to comment
Share on other sites

Sent email on Monday to Airgunsport AGS for help on tin of Accupells

as could not find email address for Crosman

 

No reply at present. :lol:

 

Very wary about buying Accupell again at £6.99 and 120 scrap? :lol:

 

Will stick to Air Arms or JSB EXACT may be 1 or 2 damaged in tin :unsure:

Link to comment
Share on other sites

:good: Contacted AirgunSport the agent for crosman accupell

 

They passed my emal and photos of faulty pellets

 

Sent thier apologies and sent me

 

A tin .22 Accupell and a TIN of Logan Penetrators .22 16.0gr

 

Free of Charge

 

Excellent Service.

 

:lol::):huh:???

Link to comment
Share on other sites

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...