smokin barrels Posted August 23, 2012 Report Share Posted August 23, 2012 Hi does anyone know where i can buy spring sticks adapted to fit FUD'S, i have made 3 myself, to use with dippa units, that i copied off you tube, but they are fiddley to make, and would prefer to buy the real thing, if there is any body retailing them. any info much appreciated, Cheers Mick. Quote Link to comment Share on other sites More sharing options...
deny essex Posted August 23, 2012 Report Share Posted August 23, 2012 (edited) There are none made commercialy, I did make prototype pegs but like you say fiddly and work out too time consumeing for the interest shown for FUD mods hence the make your own vid. I do use the pegs shown in the vid on my own FUDs and did got persueded to make a few for a friend, but as far as I can say nope not produced. Edited August 23, 2012 by deny essex Quote Link to comment Share on other sites More sharing options...
smokin barrels Posted August 23, 2012 Author Report Share Posted August 23, 2012 cheers for the info deny, looks like a few hours in the shed then, but worth the effort, Quote Link to comment Share on other sites More sharing options...
deny essex Posted August 23, 2012 Report Share Posted August 23, 2012 I have used the normal JP type spring stick which will just wedge in the washers the steel used to run through on the fud, you only have to sort out a spreader then , I did use in the early ones a strip of corrugated plastic , the type used for signs as a spreader. Im sure with a little fiddleing and imagination a simple solution will come up Good luck Quote Link to comment Share on other sites More sharing options...
here iam Posted September 17, 2012 Report Share Posted September 17, 2012 you dont need movement on Fuds they work on 3 d dimensional photo realisem, why alter a good decoy? been using them for two years now they always pull birds in make sure for every 4 you use you have two sentry ,s thats a common mistake people forget Quote Link to comment Share on other sites More sharing options...
humperdingle Posted September 17, 2012 Report Share Posted September 17, 2012 I used some rod taken from an old pop-up kids' tent that was going in the bin... Bendy, but rigid enough to go into soil. Work very well Quote Link to comment Share on other sites More sharing options...
simjakcal Posted September 17, 2012 Report Share Posted September 17, 2012 you dont need movement on Fuds they work on 3 d dimensional photo realisem, why alter a good decoy? been using them for two years now they always pull birds in make sure for every 4 you use you have two sentry ,s thats a common mistake people forget im being dull ! but what are sentry's ? plastic shell types ? cheers... Quote Link to comment Share on other sites More sharing options...
flynny Posted September 17, 2012 Report Share Posted September 17, 2012 im being dull ! but what are sentry's ? plastic shell types ? cheers... Put the heads of the fuds in the upright position as indicated on the under side of the fud mate, atb Flynny Quote Link to comment Share on other sites More sharing options...
Cosd Posted September 17, 2012 Report Share Posted September 17, 2012 (edited) See my thread http://forums.pigeonwatch.co.uk/forums/index.php?/topic/221527-simple-fud-sticks-that-work/ Edited September 17, 2012 by Cosd Quote Link to comment Share on other sites More sharing options...
sixhills 69 Posted September 17, 2012 Report Share Posted September 17, 2012 Put the heads of the fuds in the upright position as indicated on the under side of the fud mate, atb Flynny Thats a good tip never new that Quote Link to comment Share on other sites More sharing options...
simjakcal Posted September 17, 2012 Report Share Posted September 17, 2012 cheers got ya Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.