markbivvy Posted January 17, 2007 Report Share Posted January 17, 2007 if you fancy a bit of diy. http://projects.chatrifleclub.org/452triggermods.html Quote Link to comment Share on other sites More sharing options...
Graham M Posted January 18, 2007 Report Share Posted January 18, 2007 if you fancy a bit of diy. http://projects.chatrifleclub.org/452triggermods.html I used a bit of brass tube off an old "Clutch pencil" to do mine. worked very well, much better than wrapping with tin foil. G.M. Quote Link to comment Share on other sites More sharing options...
njc110381 Posted January 18, 2007 Report Share Posted January 18, 2007 An interesting read. I think I'll leave mine to a 'smith though if I want it doing. Last time I had a trigger apart, it never worked again Quote Link to comment Share on other sites More sharing options...
Peter_HMR Posted January 18, 2007 Report Share Posted January 18, 2007 All you have to do is copy the brooks kit get a brass tube that will fit in between and make sure its the right diameter and 0.16 of an inch i think and then get a suitable spring somewhere Quote Link to comment Share on other sites More sharing options...
JRDS Posted January 18, 2007 Report Share Posted January 18, 2007 Or buy a kit, fit the tube and spring that suits your needs ands sell the rest of the kit on for a cuouple or three quid less than you paid for it. Worked for me and the buyer of my part kit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.