12boreblue Posted April 7, 2014 Report Share Posted April 7, 2014 My 682 e gold adjustable comb has been playing up a bit for some time, so I stripped it down to find that the hex screw which adjusts the height of the comb had disintegrated and fell out of the stock in bits! Contacted GMK Beretta to ask where to get a new one.... told to contact my local dealer. Did that.. they said that GMK will not supply the adjuster itself you have to buy the whole kit!!!!. So does anyone know an aftermarket source? Does anyone have any specs for one as an engineer friend said he would make me some?.This is really effecting my shooting as I am left handed and need this set up. Can anyone help or advise. Also note a slight crack in the stock where the adjustable unit sits, dealer told me this is a common problem with the Beretta, anyone else had it? Many thanks. Quote Link to comment Share on other sites More sharing options...
Rupert Posted April 7, 2014 Report Share Posted April 7, 2014 If its is a standard thread then a nut and bolt merchants will help you out,Take the stock/adjuster part to them so they can ascertain the tread,round here I use B&D bolts or danlett. Quote Link to comment Share on other sites More sharing options...
Gordon R Posted April 7, 2014 Report Share Posted April 7, 2014 If it is the centre hex screw - just leave it out. I had mine removed as it kept jamming the mechanism. It is a pain and serves no useful purpose. Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted April 7, 2014 Report Share Posted April 7, 2014 Graco do one that replaces the rubbish factory one into same slot, and they ship to the uk. Quote Link to comment Share on other sites More sharing options...
Hardwoods Green Posted April 7, 2014 Report Share Posted April 7, 2014 Simon Wilmore put a Graco one in a DT10 for me once. Much better than the crappy factory effort!! Quote Link to comment Share on other sites More sharing options...
12boreblue Posted April 7, 2014 Author Report Share Posted April 7, 2014 was thinking of putting in a replacement, any idea on what a decent one would cost? Quote Link to comment Share on other sites More sharing options...
biketestace Posted April 7, 2014 Report Share Posted April 7, 2014 £190 contact Simon at Doveridge Gun Repairs Quote Link to comment Share on other sites More sharing options...
Hardwoods Green Posted April 7, 2014 Report Share Posted April 7, 2014 If it already has the 'memory' plastic bits in it will only cost about £80 for the Graco one, Simon will sort it I'm sure Quote Link to comment Share on other sites More sharing options...
Dave T Posted April 8, 2014 Report Share Posted April 8, 2014 Simon has(had) the direct Graco replacement, as the Beretta plastic one is dire! - They're a drop in jobbie with 3 posts, he replaced mine on my 682EX in 10 minutes - They're not £190 Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted April 8, 2014 Report Share Posted April 8, 2014 Honestly order it off Graco US and do it yourself it is easy 10-15 min job. Quote Link to comment Share on other sites More sharing options...
biketestace Posted April 21, 2014 Report Share Posted April 21, 2014 Simon has(had) the direct Graco replacement, as the Beretta plastic one is dire! - They're a drop in jobbie with 3 posts, he replaced mine on my 682EX in 10 minutes - They're not £190 Ah,i didn't realise the fittings were the same size mate, If it is like for like then WW has a point, fit it yourself Bta Quote Link to comment Share on other sites More sharing options...
Big Al Posted April 21, 2014 Report Share Posted April 21, 2014 (edited) A friend of mine will be very interested in this thread too. Is this the one? http://www.graco-corp.com/products/factory-replacement-hardware Edited April 21, 2014 by Big Al Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted April 21, 2014 Report Share Posted April 21, 2014 Yes that's the one last one I did took 30 mins of work. I seal the inside of the cut outs with stock oil before installing. Quote Link to comment Share on other sites More sharing options...
Big Al Posted April 21, 2014 Report Share Posted April 21, 2014 Yes that's the one last one I did took 30 mins of work. I seal the inside of the cut outs with stock oil before installing. Thanks for that - I'll pass it on. Quote Link to comment Share on other sites More sharing options...
RAMMER BURT Posted April 22, 2014 Report Share Posted April 22, 2014 just get graham jenkins to do a proper job hes in luton Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.