eddoakley Posted May 13, 2014 Report Share Posted May 13, 2014 So having tried everyyhing I can think of to remove a stuck choke from a hatsan I have decided that it just aint coming out. So do I use/sell it as it is with 1/4 choke or replace the barrel? Anyone sold one with a stuck choke? I guess if there is going to be one stuck then 1/4 is not too bad. Anyone got a spare barrel for sale? Edd Quote Link to comment Share on other sites More sharing options...
HDAV Posted May 13, 2014 Report Share Posted May 13, 2014 is it a flush choke? if not i have heard of nut being welded on and use to get it out. have stood it in a bucket of diesel for a few days? tried heating the barrel cooling the choke?(tapered key in freezer for a day barrel in hot water for an hour the smack the key in a turn?) Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted May 13, 2014 Report Share Posted May 13, 2014 Have you tried a stuck choke removal tool? Not let me down. Quote Link to comment Share on other sites More sharing options...
Will Poon Posted May 13, 2014 Report Share Posted May 13, 2014 Hack saw it off, simple, nice open choke Quote Link to comment Share on other sites More sharing options...
HDAV Posted May 13, 2014 Report Share Posted May 13, 2014 (edited) Have you tried a stuck choke removal tool? Not let me down. New barrel cheaper.............................. http://www.ebay.co.uk/itm/BadAss-Stuck-Choke-Tube-Removal-Tool-/251144571956 This might work..... http://www.machinemart.co.uk/shop/product/details/cht123-screw-extractor-wrench-set Edited May 13, 2014 by HDAV Quote Link to comment Share on other sites More sharing options...
-Mongrel- Posted May 13, 2014 Report Share Posted May 13, 2014 Standing it in a few inches of diesel for a few days is a good call. Quite astonishing what can be released this way. Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted May 13, 2014 Report Share Posted May 13, 2014 New barrel cheaper.............................. http://www.ebay.co.uk/itm/BadAss-Stuck-Choke-Tube-Removal-Tool-/251144571956 This might work..... http://www.machinemart.co.uk/shop/product/details/cht123-screw-extractor-wrench-set Don't try the second link the tool has to much of an increase in angle they tend to split the barrel and choke of really stuck chokes, seen it done a few times. The bad *** tool works well and has never let me down expensive for one fix worth while if you do a few. Quote Link to comment Share on other sites More sharing options...
HDAV Posted May 25, 2014 Report Share Posted May 25, 2014 Did you get it out or sell it as was? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.