Jump to content

Ruger 10/22 Trigger - Volquartsen Hammer Pack and Bolt Release


M4X
 Share

Recommended Posts

Volquartsen Hammer Pack and Bolt Release part no. HC10HB

 

This kit makes an amazing difference!

 

"The target hammer is designed to give the factory Ruger 10/22 a superb “trigger job” by simply replacing the factory hammer. No stoning or fitting is required. Reduces trigger pull down to approximately 2.5 – 2.75lbs. Made of stainless steel, hardened to Rc 58-60. Includes our 10/22 hammer spring, hammer bushings, hammer shims and trigger return spring."
"Bolt Stop/Release allows the bolt to be pulled rearward and the stop automatically releases the bolt. This is accomplished without the need to manually push up and rearward on the bolt stop."

 

The bolt stop/release is silver in colour but you do not see much of it hiding behind the trigger! (See photo)

 

This kit is brand new and unopened. It will do both the polymer and the metal trigger housings (many don't) it also does the 10/22 TakeDown as well. It comes with instructions, although not for the bolt release for some absurd reason. Loads of vids on youtube though.

 

£56.00 posted

 

To buy these separately would be in the region of £62.90 plus postage.

 

 

 

2_m.jpg3_m.jpg4_m.jpg5_m.jpg6_m.jpg7_m.jpg1_m.jpg

 

Link to comment
Share on other sites

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...