Jump to content

fn12 light hunter help


norfolkgoose
 Share

Recommended Posts

Hi to all I got myself a fn12 light hunter singleshot in .177 which I am very pleased with but its fitted with the falcon quick fill moderator which is fairly good on its own . I also have a extra moderator with it the problem being when I fit the extra mod the pellets are hitting the end of it and going every where is there a way of ajusting anything to stop this happening as it is very quiet with the extra mod and the only thing I can hear is the hammer hitting the valve ?

So would like to see if anyone knows how to rectify this if it can be many thanks to all.

Link to comment
Share on other sites

You can buy a silencer adapter to fit an after market silencer! Make sure it's a proper Falcon Barrel one though! Load of people buy the 10mm AirArms one and it does NOT fit!

 

I use a HW silencer on mine and it's superb! The Quick fill moderator set up is OKish but you will find quieter with an after market adapter and silencer!

Link to comment
Share on other sites

Unscrew the sak and check for damage. They have a solid core with large cavities drilled through so nothing can come loose, so unless it has been badly modified then there is either something in there that shouldn't be or one if the threads is out of line.

 

I still think replacing the qf mod and sak with two separate units is the way forward, and if you sell both it may not cost very much, if anything, to do.

Edited by FalconFN
Link to comment
Share on other sites

Thanks for the suggestion Falcon as it happens I have had it appart and the only bit that its hitting is the very end as it leaves it or as far as I can see .

where about can I find this other quick fill mod as the only ones I have found are the original quick fill mods

many thank again.

Link to comment
Share on other sites

It is different from the one I use (that one seems to have been discontinued) but best fittings do the kits for £20 http://www.bestfittings.co.uk/shopdisplayproducts.asp?id=199&cat=Quick+Coupler+Starter+Kits

Then you just need a 1/2" unf silencer adapter to fix to the barrel, which are quite cheap on ebay, and a decent silencer. I would say the sak may be a better rimfire silencer but it is 7/10 on an air rifle.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...