6.5x55SE Posted September 10, 2016 Report Share Posted September 10, 2016 (edited) A mate had a clear out and gave me 3 sealed round tubes of Nobel 64 powder. Would any of you Gentleman have any Trusted load data for 12ga and 20ga Pigeon loads eg 7/8 oz to 1-1/8 oz. Thanks Edited September 10, 2016 by 6.5x55SE Quote Link to comment Share on other sites More sharing options...
TONY R Posted September 11, 2016 Report Share Posted September 11, 2016 Sorry fella Nobel 64 is a bit before my time i was in nappies when it was in its heyday, did lots with 82 as you probably did, but not 64. So all i got is a quick phone snap out of the ubiquitous David Garads book from the 1970s that touches on it with this brief discription. Quote Link to comment Share on other sites More sharing options...
222 Posted September 11, 2016 Report Share Posted September 11, 2016 right mate here goes 3 inch case ounce @ three quarter 32 grains nobel 64 60 wad pressure kleena wads 1022 FPS 2.94 TPSI 3 inch case ounce three quarter shot 33grains noble 64 60 wad pressure kleena wads 1063 FPS 3.49 TPSI i have a cardboard container of the same given me by an old boy down drove end he used to load 3 inch paper cases and roll them for his old 3 inch hammer gun he also gave me some 3.5 inch paper cases loaded dont know whats in them but still have them at home see you soon john Quote Link to comment Share on other sites More sharing options...
dipper Posted September 11, 2016 Report Share Posted September 11, 2016 Gun proofed 2 3/4 load cci primer 30 grains of 64 powder plaswad mk 4 1 1/4 oz shot . You could develope a 1 1/8 oz load but better with heavy loads . You could also develope a 1oz 20 load but l have no data Dipper. Quote Link to comment Share on other sites More sharing options...
6.5x55SE Posted September 11, 2016 Author Report Share Posted September 11, 2016 right mate here goes 3 inch case ounce @ three quarter 32 grains nobel 64 60 wad pressure kleena wads 1022 FPS 2.94 TPSI 3 inch case ounce three quarter shot 33grains noble 64 60 wad pressure kleena wads 1063 FPS 3.49 TPSI i have a cardboard container of the same given me by an old boy down drove end he used to load 3 inch paper cases and roll them for his old 3 inch hammer gun he also gave me some 3.5 inch paper cases loaded dont know whats in them but still have them at home see you soon john Thanks John When i opened a Tube which had some data it was all lead fowling loads Quote Link to comment Share on other sites More sharing options...
6.5x55SE Posted September 11, 2016 Author Report Share Posted September 11, 2016 Gun proofed 2 3/4 load cci primer 30 grains of 64 powder plaswad mk 4 1 1/4 oz shot . You could develope a 1 1/8 oz load but better with heavy loads . You could also develope a 1oz 20 load but l have no data Dipper. Thanks for your reply 12ga 32gm and 20ga 28gram would be spot on. Have you a safe clue where to start load development Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.