Jump to content

4x4 boot cabinet


welshwarrior
 Share

Recommended Posts

Obviously every application is different, but your comment on 'ply' is important. My suggestion is use the best you can afford, don't cut corners. I built a false floor over the lpg tank in the rear well of my LR90. and when measuring up realised there was a large area to the rear which could be used, so I hinged the rear two thirds for access. I left the wheel arch tops clear and found plastic storage boxes which snugly fit in there for all the bits and pieces a shooter/countryman carries. Material, and this goes back to ply. I found that I had a very old table top in my workshop which fitted the space perfectly, 3/4 inch good quality ply and a varnished finish. I cut it at the point I needed the hinge to go, so it would fold completely back flat so I could still get some pretty large items in there when needed, but with it down it covered any valuable items from prying eyes. OK, I know this doesn't relate to your vehicle, but do as I did and stand back a bit before starting construction, think it through and don't skimp on the materials.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...