Jump to content

SAK Mod recommendations- thank you!


PPP
 Share

Recommended Posts

On ‎01‎/‎07‎/‎2018 at 14:13, steve_b_wales said:

SAKS also have a limited lifetime guarantee. They will replace your moderator for 60% (I believe) of the full retail price.

Still do as far as I'm aware, I think a lot of people forget that (or don't even know about it).

:good:

Link to comment
Share on other sites

  • 3 weeks later...

I have a SAKS mod on my CZ455, it does the job really well, only sound is a tiny "ppfft" from the muzzle and the bullet impact with subs. It tames HV ammo to an acceptable level too.

While on the subject of mods, and apologies if i'm hijacking OP's thread, the POI alters with the mod in place by roughly half inch at 25 metres as opposed to when the muzzle brake is fitted.  I thought maybe it's shaving a sliver of the bullet but i don't know.

Any thoughts on this?

Edited by Buck100
Link to comment
Share on other sites

8 hours ago, Buck100 said:

I have a SAKS mod on my CZ455, it does the job really well, only sound is a tiny "ppfft" from the muzzle and the bullet impact with subs. It tames HV ammo to an acceptable level too.

While on the subject of mods, and apologies if i'm hijacking OP's thread, the POI alters with the mod in place by roughly half inch at 25 metres as opposed to when the muzzle brake is fitted.  I thought maybe it's shaving a sliver of the bullet but i don't know.

Any thoughts on this?

I think it’s due to the difference in weight (or maybe pressure) rather than modifying the bullet unless you are spraying bullets all over the place?

Link to comment
Share on other sites

23 hours ago, Buck100 said:

I have a SAKS mod on my CZ455, it does the job really well, only sound is a tiny "ppfft" from the muzzle and the bullet impact with subs. It tames HV ammo to an acceptable level too.

While on the subject of mods, and apologies if i'm hijacking OP's thread, the POI alters with the mod in place by roughly half inch at 25 metres as opposed to when the muzzle brake is fitted.  I thought maybe it's shaving a sliver of the bullet but i don't know.

Any thoughts on this?

Most (but not all) guns change POI with and without a mod. As long as it's still grouping OK. just zero it in with the mod on. It's something to do with the barrel harmonics changing with the extra weight and length. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...