strimmer_13 Posted July 5, 2018 Report Share Posted July 5, 2018 well that was a result (kind of) I honestly thought somebody was pulling my leg but these guys I was shooting with the other day insisted on putting a cut down baby bottle brush in my air chamber of my falcon to stop the ping. They had them in their concepts. Well after 2 hours of watching vids on how to strip it down, I put it in and test fired - no more ping! Only issue is the bloody seal is leaking as I didn't tighten it enough. My fault but what a easy fix. I'm well pleased. Anybody else heard of any other weird ways? Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted July 5, 2018 Report Share Posted July 5, 2018 That is a great fix to the ping of the air cylinder . Quote Link to comment Share on other sites More sharing options...
strimmer_13 Posted July 5, 2018 Author Report Share Posted July 5, 2018 Works a treat. I heard about film canisters with a hole drilled in them but a brush I thought was taking the ****. Quote Link to comment Share on other sites More sharing options...
rovercoupe Posted July 6, 2018 Report Share Posted July 6, 2018 Tap washer shoved in the tube works a treat too Quote Link to comment Share on other sites More sharing options...
Dekers Posted July 8, 2018 Report Share Posted July 8, 2018 They used to offer a detwanger as a part I seem to recall! Quote Link to comment Share on other sites More sharing options...
strimmer_13 Posted July 8, 2018 Author Report Share Posted July 8, 2018 Such a long cylinder on the fn19. Did consider a reg but after advice on here I didn't bother. Quote Link to comment Share on other sites More sharing options...
Pistol p Posted July 10, 2018 Report Share Posted July 10, 2018 I've filled my air reservoirs with plastic drinking straws. Works fine. Quote Link to comment Share on other sites More sharing options...
strimmer_13 Posted July 11, 2018 Author Report Share Posted July 11, 2018 On 10/07/2018 at 06:53, Pistol p said: I've filled my air reservoirs with plastic drinking straws. Works fine. Quote Link to comment Share on other sites More sharing options...
Longbower Posted July 13, 2018 Report Share Posted July 13, 2018 Straws in my Scorpion ? Quote Link to comment Share on other sites More sharing options...
strimmer_13 Posted July 15, 2018 Author Report Share Posted July 15, 2018 On 14/07/2018 at 00:18, Longbower said: Straws in my Scorpion ? Do you glue or tape them together or just put enough in so it's a tight fit sideways? Quote Link to comment Share on other sites More sharing options...
Longbower Posted July 15, 2018 Report Share Posted July 15, 2018 Surgical tape , was all i had . Two bands , 3mm in from each end of the straws which were cut in half length wise. Never had a problem and they have been in there 18 months. Quote Link to comment Share on other sites More sharing options...
strimmer_13 Posted July 15, 2018 Author Report Share Posted July 15, 2018 Great idea and obviously works Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.