Jump to content

Hogden powder


Recommended Posts

Guest cookoff013

Mr white.

I tend to like when powders are running at there max payload. Usually 1200fps is doable. You wont see diddley difference betwix you normal loads.

Research. Read the data. Dont just see it.

It might be a "longshot" but the data is there.

Link to comment
Share on other sites

  • 2 weeks later...
1 hour ago, Yellow belly said:

Trying felt filler instead of cork to see if that tightens pattern up a bit.

How hard is your shot as pressure guide says need at least 3% antimony shot if you are reaching 10,000psi with 20 to 21+gr Longshot?

Scavenging a few high performance 28g clay shells (5% antimony) for a few cartridges worth of shot may be worth effort to see if it is shot or wad which is reason for spread.

Edited by Stonepark
Link to comment
Share on other sites

Hi

Using 20.5gr and nickel plated shot, so should be hard enough. Longshot data on their website is for plas wads. Expect pressure to be lower in fibre load with same powder load. My chrono stating circa 1180 fps.

It's not a bad pattern at 45 yards, but always looking to improve.

Cheers 

Edited by Yellow belly
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...