the hitman Posted December 6, 2019 Report Share Posted December 6, 2019 Hi Folks Just had my gas Worcester Bosch Highflow 400 serviced by British Gas and as it’s 20+ years old with many parts becoming obsolete he recommended I replace it. We have a 4 bedroom terrace house with 11 radiators 3 of which are doubles. if any plumbing engineers here could recommend a boiler and roughly how much ( it’s a straight replacement in the same location) it would cost. I would be happy with another Highflow but just not sure what else in out there Cheers Hitman . Quote Link to comment Share on other sites More sharing options...
Deker Posted December 6, 2019 Report Share Posted December 6, 2019 is it broken? Quote Link to comment Share on other sites More sharing options...
the hitman Posted December 6, 2019 Author Report Share Posted December 6, 2019 Hi Deker No it’s working fine now. It had a new diverter value fitted as the heating wasn’t always coming on. Engineer recons this is one of the parts that would be difficult to replace, but thankfully he had one in his van. Quote Link to comment Share on other sites More sharing options...
vmaxphil Posted December 6, 2019 Report Share Posted December 6, 2019 Not that obsolete then 🤔 Quote Link to comment Share on other sites More sharing options...
discobob Posted December 6, 2019 Report Share Posted December 6, 2019 https://heat-group.co.uk/collections/spare-parts/range_worcester-bosch-highflow-400?gclid=CjwKCAiAlajvBRB_EiwA4vAqiKl0pveRaPpisZiCwbPZ8UXUANVS5wmb4dRebEvWEty-FShdfW4R4xoCHPcQAvD_BwE Quote Link to comment Share on other sites More sharing options...
Yellow Bear Posted December 6, 2019 Report Share Posted December 6, 2019 3 hours ago, the hitman said: Hi Folks Just had my gas Worcester Bosch Highflow 400 serviced by British Gas and as it’s 20+ years old with many parts becoming obsolete he recommended I replace it. We have a 4 bedroom terrace house with 11 radiators 3 of which are doubles. if any plumbing engineers here could recommend a boiler and roughly how much ( it’s a straight replacement in the same location) it would cost. I would be happy with another Highflow but just not sure what else in out there Cheers Hitman . Being a BG "engineer" I suspect he was talking out of his rear fundamental orifice and trying to "drum up" work. They do it all the time Quote Link to comment Share on other sites More sharing options...
panoma1 Posted December 6, 2019 Report Share Posted December 6, 2019 If it ain’t bust done replace it! Quote Link to comment Share on other sites More sharing options...
Deker Posted December 6, 2019 Report Share Posted December 6, 2019 2 hours ago, the hitman said: Hi Deker No it’s working fine now. It had a new diverter value fitted as the heating wasn’t always coming on. Engineer recons this is one of the parts that would be difficult to replace, but thankfully he had one in his van. I had similar advice about my Vaillant boiler so decided to get a few quotes, one of the engineers who visited said to just run it until it does fail and then if it isn't economically repairable (or even possible) replace it then otherwise the newer boiler would probably need replacing again before any return on money saving due to efficiencies. Quote Link to comment Share on other sites More sharing options...
the hitman Posted December 6, 2019 Author Report Share Posted December 6, 2019 Very interesting replies which has me thinking that it’s a scare tactic. Thank you for all the advice, I think I will see this winter out then get a couple of quotes just so I have an idea in case it does pack in completely. Quote Link to comment Share on other sites More sharing options...
eddoakley Posted December 6, 2019 Report Share Posted December 6, 2019 Plenty of good boilers and many fitters will offer many views of which is the best. Any of the big names should be absolutely fine but as said above if it ain't broke don't fix it. Could happily run for another 10 years and one engineer saying that parts are obsolete doesn't make it so. Service and maintain it until it's broken beyond economical repair before replacing would be my suggestion. Edd Quote Link to comment Share on other sites More sharing options...
B725 Posted December 6, 2019 Report Share Posted December 6, 2019 BG will always try to convince you that your boiler is knackered and you should replace it. If you ever do decide to renew it ask BG for a quote you will be gob smacked how dear it is. Quote Link to comment Share on other sites More sharing options...
Gu5 Posted December 6, 2019 Report Share Posted December 6, 2019 How about you get a bulk stock of spare parts to keep it going longer 🤣👍 Quote Link to comment Share on other sites More sharing options...
the hitman Posted December 6, 2019 Author Report Share Posted December 6, 2019 29 minutes ago, eddoakley said: Plenty of good boilers and many fitters will offer many views of which is the best. Any of the big names should be absolutely fine but as said above if it ain't broke don't fix it. Could happily run for another 10 years and one engineer saying that parts are obsolete doesn't make it so. Service and maintain it until it's broken beyond economical repair before replacing would be my suggestion. Edd Cheers for the sound advice. Once again the P/W faithful come up with the goods. Hitman. Quote Link to comment Share on other sites More sharing options...
figgy Posted December 7, 2019 Report Share Posted December 7, 2019 When you have to replace it then ask for recommendations as things change. What's good now may be poor in five years. Quote Link to comment Share on other sites More sharing options...
old man Posted December 7, 2019 Report Share Posted December 7, 2019 (edited) 6 hours ago, figgy said: When you have to replace it then ask for recommendations as things change. What's good now may be poor in five years. Probable by then that gas heating will have been given the kiss of death by Chris, Greta and good old Dave? Edited December 7, 2019 by old man Quote Link to comment Share on other sites More sharing options...
bavarianbrit Posted December 7, 2019 Report Share Posted December 7, 2019 A 6 year old unit in a 3 bed house just had to have it replaced due to not being economic to repair = £1800. New **** aint made worth tuppence. Quote Link to comment Share on other sites More sharing options...
Benthejockey Posted December 8, 2019 Report Share Posted December 8, 2019 Wife had the boiler replaced in our barn conversion just before she met me. It cost £3k. As long as it was serviced yearly by Worcester Bosch it had a 2yr warranty. Which sounded good but the service charge from a WB licensed engineer was expensive. At the new house we've got a hot water cylinder and traditional boiler which would be cheaper to replace. There was an issue with it when we first moved in so Mrs BTJ got WB to come and have a look and they told her how old and knackered it was and would need replacing within 12/18 months. She loves to stress about things! It died about a month ago, que impending doom, misery and firey brimstone from the depths of hell. Me and dad stripped it down and despite both WB and the woman we bought off confirming it had been serviced it definitely hadnt been serviced in a very long time! Friendly heating engineer from Oswestry way, 2 litres of contaminated oil, a new jet and just shy of £100 later and we were back in business. He said that yes it was an old boiler but parts are still made and will be available new or second hand for years and we wouldn't need to replace the boiler probably as long as we live there. So it's always good to take what the big companies say with a pinch of salt. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.