hodge911 Posted January 5, 2020 Report Share Posted January 5, 2020 found this quite interesting and ends up with a nice knife Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted January 5, 2020 Report Share Posted January 5, 2020 hello, we did the same when i started in Engineering but used a wide hacksaw blade from our old fashioned metal saw, Quote Link to comment Share on other sites More sharing options...
bluesj Posted January 5, 2020 Report Share Posted January 5, 2020 12 minutes ago, oldypigeonpopper said: hello, we did the same when i started in Engineering but used a wide hacksaw blade from our old fashioned metal saw, And a scraper out of the over bit! I've still got the scraper in my tool box along with the "C" spanner Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted January 5, 2020 Report Share Posted January 5, 2020 1 hour ago, bluesj said: And a scraper out of the over bit! I've still got the scraper in my tool box along with the "C" spanner hello, they were the good old days in engineering, this one started of from a humble Blacksmiths to a full time Engineering workshop, most of the products were shipped abroad via Government contracts Quote Link to comment Share on other sites More sharing options...
bluesj Posted January 5, 2020 Report Share Posted January 5, 2020 54 minutes ago, oldypigeonpopper said: hello, they were the good old days in engineering, this one started of from a humble Blacksmiths to a full time Engineering workshop, most of the products were shipped abroad via Government contracts I was training in ag engineering in the time before just replacing bits in the hope it would start working. When I got back into the ag engineering trade after 20+ years doing other things I was still working on the same machinery! You know how farmer don't like throwing things away 😁. even found a couple of temporary repairs I had made still going strong Quote Link to comment Share on other sites More sharing options...
Lampwick Posted January 6, 2020 Report Share Posted January 6, 2020 That was a pleasant way to round off the weekend! Cheers I enjoyed that, and I have loads of circular saw blades in the garage!!!! Quote Link to comment Share on other sites More sharing options...
hodge911 Posted January 6, 2020 Author Report Share Posted January 6, 2020 10 hours ago, Lampwick said: That was a pleasant way to round off the weekend! Cheers I enjoyed that, and I have loads of circular saw blades in the garage!!!! I have some as well but they don't seem to be as thick as the one he used , I,m assuming the one he uses is from an industrial large saw Quote Link to comment Share on other sites More sharing options...
fatchap Posted January 6, 2020 Report Share Posted January 6, 2020 My first Stickleback Knife I ever made was out of a circular saw blade. Difficult to work with I found, tends to warp a bit during heat treat. Quote Link to comment Share on other sites More sharing options...
Scully Posted January 7, 2020 Report Share Posted January 7, 2020 Really enjoyed that, thanks for posting. Quote Link to comment Share on other sites More sharing options...
Leach Posted January 25, 2020 Report Share Posted January 25, 2020 Could do with some better stake knives the handles snap off with really tough meat my sister belts the meat with knuckle duster Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.