Jump to content
Sign in to follow this  
PeterHenry

David Brown 880 bonnet

Recommended Posts

Hi All,

I'm trying to figure out how the bonnet fits on a David Brown 880 Selectamatic.

I originally though that it had something to do with the two holes on the panels at the front of the bonnet - but on closer inspection, these seem to be for headlights and other attachments. Also, and despite the fact I'm missing the chin peice (part 915507) I cant find anything for it to bolt onto - so I'm wondering, does it just sit on, and the front of it rests on the chin piece?

 

Finally, does anyone know what size the top coupling for the three point linkage needs to be? I've tried the one off my Zetor 6718, and that's too big.

 

Best,

 

Peter

Share this post


Link to post
Share on other sites
Posted (edited)

Theres a catch either side of the fuel tank.accesible under the bonnet sides.I think but it was a long time ago.

Or near the front.Just rubber t shaped catches.

Air cleaner inlet and exhaust off and maybe fuel cap and you should be good to go.

 

Edited by wisdom
Adding text.

Share this post


Link to post
Share on other sites

Agriline have a good website for pins ,linkage parts etc with dimensions.Hth.

Share this post


Link to post
Share on other sites
On 09/06/2020 at 18:40, PeterHenry said:

Hi All,

I'm trying to figure out how the bonnet fits on a David Brown 880 Selectamatic.

I originally though that it had something to do with the two holes on the panels at the front of the bonnet - but on closer inspection, these seem to be for headlights and other attachments. Also, and despite the fact I'm missing the chin peice (part 915507) I cant find anything for it to bolt onto - so I'm wondering, does it just sit on, and the front of it rests on the chin piece?

 

Finally, does anyone know what size the top coupling for the three point linkage needs to be? I've tried the one off my Zetor 6718, and that's too big.

 

Best,

 

Peter

The 990 ""880 just smaller" upwer bonnet section has provision for lights but often has a gold grille trim and they just fit outboard lights. The black grill itself had two tabs at bottom edge sits on centre lower panel lip in front of betray area, and is held in place with two pins yop corners just under the gold grille.

Share this post


Link to post
Share on other sites
On 11/06/2020 at 23:15, lancer425 said:

The 990 ""880 just smaller" upwer bonnet section has provision for lights but often has a gold grille trim and they just fit outboard lights. The black grill itself had two tabs at bottom edge sits on centre lower panel lip in front of betray area, and is held in place with two pins yop corners just under the gold grille.

👍

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...