oldypigeonpopper Posted November 27, 2020 Report Share Posted November 27, 2020 Hello, as above, my friend has one and fitted with a brand new Hawke scope cannot seem to get zero using Winchester 17s , gets 3/4/5 shots good on target, around 5 mm inside bulls eye then 1 or 2 3 to 4 inches apart, this Hawke is AO to fit a Pard 007, he has cleaned barrel and checked Mod, using his day scope can get flyers but very few, bad ammo ? Barrel problems, Moderator ? I cannot see the hawke scope faulty, any thoughts ? Quote Link to comment Share on other sites More sharing options...
Walker570 Posted November 27, 2020 Report Share Posted November 27, 2020 Try some Hornady. It may be it does not like the Winchesters. I would not believe it was barrel heating either BUT it may be involved. Obviously eliminated human error ????? I have a Tbolt 22RF and it is surgical. Quote Link to comment Share on other sites More sharing options...
Rewulf Posted November 27, 2020 Report Share Posted November 27, 2020 1 hour ago, oldypigeonpopper said: Hello, as above, my friend has one and fitted with a brand new Hawke scope cannot seem to get zero using Winchester 17s , gets 3/4/5 shots good on target, around 5 mm inside bulls eye then 1 or 2 3 to 4 inches apart, this Hawke is AO to fit a Pard 007, he has cleaned barrel and checked Mod, using his day scope can get flyers but very few, bad ammo ? Barrel problems, Moderator ? I cannot see the hawke scope faulty, any thoughts ? Ive got one , check clearance between barrel and stock , also check the scope mounting blocks are tight. Other than that , ammo issue, which is why I dont use mine anymore. Quote Link to comment Share on other sites More sharing options...
aister Posted November 27, 2020 Report Share Posted November 27, 2020 I have a T-bolt that really does not like winchester ammo, 4-5 inchesgroup at 100 whereas the hornady ammo is around about 1 - 1 1/2 inches sometimes better on a good day. Quote Link to comment Share on other sites More sharing options...
Zetter Posted November 27, 2020 Report Share Posted November 27, 2020 When I had a T bolt the worst results I got by Far were with Winchester ammo. Hornaday or Remington were miles better Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted November 27, 2020 Author Report Share Posted November 27, 2020 6 hours ago, Rewulf said: Ive got one , check clearance between barrel and stock , also check the scope mounting blocks are tight. Other than that , ammo issue, which is why I dont use mine anymore. Hello, thankyou, all noted👍 51 minutes ago, Zetter said: When I had a T bolt the worst results I got by Far were with Winchester ammo. Hornaday or Remington were miles better Hello, I think it's the Winchester's as he said a few misfires to, yet with the day scope was ok but these were from a different RFD, cheers Quote Link to comment Share on other sites More sharing options...
PPP Posted December 4, 2020 Report Share Posted December 4, 2020 Comment about mounting blocks is very valid.. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted December 5, 2020 Author Report Share Posted December 5, 2020 Hello, thanks for all replies, turned out duff box of Winnie ammo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.