Jump to content

Recommended Posts

I’ve just had a new regulator fitted to my FX Bobcat. The gun has always run at 49 ft/lbs+ but the new Reg is running the gun at about 45 ft/lbs. Will a new Reg take time to settle in?  

Link to post
Share on other sites

Just doing some calculations and to get the gun to the power level it was I need another 30+ FPS when you look at it that way the 4 ft/lb sounds quite a lot using jsb exact king heavy MK2 33.95gr .25. My main concern is that the accuracy is not as good as it was before the new Reg 
 

 

Link to post
Share on other sites

Up the reg pressure and see if your FPS increases, if not drop pressure out of gun and reduce your reg pressure.

If reg pressure is too high your hammer spring can't open the valve enough.

Link to post
Share on other sites

Thanks for all the tips, my bobcat is a MK1. I bought it brand new about 5 years ago and it does not have a separate regulator gauge or adjustment so in the past I have done the old fashioned method of trying every pellet I could and found the JSB king MK2 33.95gn to be very accurate but as I say now with the slight drop in power these pellets are not so accurate. I think I better call the SGC as they have been doing the repairs 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...