Jump to content

CZ 452 bolt assembly ???.


samboy
 Share

Recommended Posts

Hi gang.

            Was just watching this on youtube. The chap took the bolt apart for cleaning and put the extractor and holder on the opposite side to

            which he took them out. Does this make any difference ?.

             I've just put my new ones in the same as i took them out. 

Link to comment
Share on other sites

47 minutes ago, samboy said:

Hi gang.

            Was just watching this on youtube. The chap took the bolt apart for cleaning and put the extractor and holder on the opposite side to

            which he took them out. Does this make any difference ?.

             I've just put my new ones in the same as i took them out. 

Yes thats the one. I missed the bit about putting it back wrong. I wish i could put the safety catch back as quick as they do.

There is another video where the chap has made a little device for pushing the spring in.

I am going to make one as its got to be easier than struggling with an empty case like i do.

Link to comment
Share on other sites

I made this block for working on my CZ,the brass fitting is part of an old bike carb (i think?)that was lurking in my odds n s*ds box,the hole in the block is used for placing the trigger unit over to punch out the pins,the rubber is a piece of old bar top beer mat,it just protects the trigger block from bare wood,i did a fair amount of work on my trigger & bolt & some careful fettling on the agricultural safety catch,this simple block made the work a lot quicker & easier.

 

[url=https://ibb.co/c2P2w5g][img]https://i.ibb.co/6D2D8hn/20210218-155912.jpg[/img][/url]

[url=https://ibb.co/7rQZ5S1][img]https://i.ibb.co/5skSy1R/20210218-155924.jpg[/img][/url]

[url=https://ibb.co/z2H3gbZ][img]https://i.ibb.co/C9sjyvQ/20210218-155941.jpg[/img][/url]

 

EDIT: for some reason my pics won't upload,never had this problem before!?

Edited by 51/50
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...