Graham M Posted May 29, 2021 Report Share Posted May 29, 2021 (edited) Been using my AA S200 air rifle for a while but couldn't help think that the reservoir wasn't holding the air. So I pumped it up an dropped it into the sink and was surprised to see bubbles coming up from both ends of the cylinder where the valves are attached. Now I have read that it is a bit of a job taking these off, so I decided to have a go at making a removal tool and it turned out really well. The removal was a doddle with this tool and a good vice with aluminum jaws. Edited May 29, 2021 by Graham M Quote Link to comment Share on other sites More sharing options...
ditchman Posted May 29, 2021 Report Share Posted May 29, 2021 what sealant is used ? Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted May 29, 2021 Report Share Posted May 29, 2021 Hello, nice bit of engineering graham Quote Link to comment Share on other sites More sharing options...
Graham M Posted May 29, 2021 Author Report Share Posted May 29, 2021 (edited) 4 hours ago, ditchman said: what sealant is used ? I used the silicone grease that I bought from Hills when I bought the pump. https://www.airriflepump.com/acatalog/Air_Rifle_Pump_Silicone_Grease.html#SID=13 Edited May 29, 2021 by Graham M Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.