stevewall968 Posted September 13, 2021 Report Share Posted September 13, 2021 Had a real problem with my 525 XS Pro this weekend when I couldn’t get the forend off to clean the gun. The reason being that the two screws that hold the tungsten barrel weights had unscrewed themselves due to recoil following a round of clays. The weights had dropped and the screws had then wedged the forend wood hard. The gun wouldn’t lock shut nor break open. It took me and a good engineer friend four hours to get the thing apart and able to remove the forend completely. Believe me it was a right royal PITA. The whole problem could have been avoided if the Browning weights had been supplied with spring washers or with an advisory to use loctite threadlocker on the screws before using the gun. You have been warned😱😱 Steve Quote Link to comment Share on other sites More sharing options...
BlaserF3 Posted September 13, 2021 Report Share Posted September 13, 2021 I used red Loctite on mine and I also filed the screws to make them slightly shorter, so the screw did not go past the weight as they are very close to the wood if you leave them the standard length. Quote Link to comment Share on other sites More sharing options...
stevewall968 Posted September 13, 2021 Author Report Share Posted September 13, 2021 They are really poorly designed and after today’s experience are now residing in the bin. The joke of it is that Browning will charge you the thick end of £60 for this product which IMHO is definitely not fit for purpose. If in future I need any extra weight I’ll use golfers stick on lead tape. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.