Blackjack Posted October 23, 2021 Report Share Posted October 23, 2021 HELP! I have a Rossi 20G single barrel circa 2009 with a broken firing pin. The pin sheared at the joint to the body. The firing pin used is, I believe, the same pin used in Harrington & Richardson (now NEF - New England Firearms) single shot shotguns. The firing pin is the sloping back design version as pictured above. The broken pin is available for use as a model and I also require a spring. The pin dimensions are: Whole pin and body is 20.75mm long in total Pin alone is 1.97mm in diameter Body alone is 10.18mm long with 5.46mm in diameter Does anyone have a suggestion where I can source one of these pins (and a spring) or if anyone know someone who can make one to order on a small lathe? Any help would be greatly appreciated! Thanks, Blackjack Link to comment Share on other sites More sharing options...
Zapp Posted October 23, 2021 Report Share Posted October 23, 2021 Try giving Wabbitbosher a message Link to comment Share on other sites More sharing options...
Blackjack Posted October 23, 2021 Author Report Share Posted October 23, 2021 Thanks I will! Link to comment Share on other sites More sharing options...
Recommended Posts