Longbower Posted January 10, 2022 Report Share Posted January 10, 2022 I recently purchased a replacement / spare mag for my Daystate Regal . Its a 3Dprinted item from Element Objects . I followed the instructions , tried the 'Stop pin' in the holes provided , but the pellet probe would not go through the mag, even if I 'Floated' the mag to try and centralise it. It was quite expensive . So will contact the gun shop i bought it from. Very disappointing. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted January 10, 2022 Report Share Posted January 10, 2022 (edited) Hello, look on the Carm air rifle magazine web site, very good quality , if you go on the UK AGF forum there's a member who buys direct from Darko and you can place an order with the forum member, Skeet UK Edited January 10, 2022 by oldypigeonpopper Quote Link to comment Share on other sites More sharing options...
old man Posted January 11, 2022 Report Share Posted January 11, 2022 I had a similar printed one for the 200 that didn't work either, the bay forced a refund. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted January 13, 2022 Report Share Posted January 13, 2022 Hello, how did you get on with your Regal magazines ? Quote Link to comment Share on other sites More sharing options...
Longbower Posted January 17, 2022 Author Report Share Posted January 17, 2022 I emailed the supplier , who gave me some advice, about how to set it up and I tried it today . It still wouldn't operate properly. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted January 17, 2022 Report Share Posted January 17, 2022 9 hours ago, Longbower said: I emailed the supplier , who gave me some advice, about how to set it up and I tried it today . It still wouldn't operate properly. Hello, ok I would take it back to gun shop and get a refund, Quote Link to comment Share on other sites More sharing options...
Longbower Posted January 17, 2022 Author Report Share Posted January 17, 2022 10 hours ago, oldypigeonpopper said: Hello, ok I would take it back to gun shop and get a refund, Would cost me more in Diesel than refund. When I get time I will see whats stopping it from locating properly. I might be able to re engineer it slightly. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted January 17, 2022 Report Share Posted January 17, 2022 1 hour ago, Longbower said: Would cost me more in Diesel than refund. When I get time I will see whats stopping it from locating properly. I might be able to re engineer it slightly. Hope you can get it sorted Quote Link to comment Share on other sites More sharing options...
Mice! Posted January 17, 2022 Report Share Posted January 17, 2022 3 hours ago, Longbower said: Would cost me more in Diesel than refund. When I get time I will see whats stopping it from locating properly. I might be able to re engineer it slightly. I'd ring them up then post it back to them recorded delivery, and ask them to do the same? Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted January 18, 2022 Report Share Posted January 18, 2022 8 hours ago, Mice! said: I'd ring them up then post it back to them recorded delivery, and ask them to do the same? Hello, that sounds a good idea to, shame you have to go to this just for a faulty item, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.