Donkey Posted January 16, 2022 Report Share Posted January 16, 2022 Hi what do you use to trim your 410 cases down I’m in the market to buy one and not sure what works best cheers donkey Quote Link to comment Share on other sites More sharing options...
bluesj Posted January 16, 2022 Report Share Posted January 16, 2022 A bit of wooden dowel with a scalpel blade stuck in it. http://3.bp.blogspot.com/-NJxXma-dStY/Vfhg2DPY0fI/AAAAAAAAFRc/_NQuC61ZzwA/s1600/rool%2Bcrimp%2B005.JPG Quote Link to comment Share on other sites More sharing options...
Dave at kelton Posted January 16, 2022 Report Share Posted January 16, 2022 If you can find a piece of pipe the case will fit inside up to the rim, cut it exactly to the length you need and just use a Stanley knife. I do it with other bore sizes not .410 so dont know what internal diameter you would need. Quote Link to comment Share on other sites More sharing options...
Stonepark Posted January 16, 2022 Report Share Posted January 16, 2022 3d printed one on ebay from a chap in Glasgow sometimes. Quote Link to comment Share on other sites More sharing options...
Donkey Posted January 16, 2022 Author Report Share Posted January 16, 2022 Thanks for the replies bluesj how do you get the blade to stay in the dowel with it being so thin a blade a saw cut would be to big for a tight fit so I guess glue in dave at Kelton I’ll try a bit of 15mm copper pipe tomorrow think that may work stonepark I’ve seen some from ussr on e bay but would prefer to buy British if I was to buy one I’ll have a look for this guy thanks all Quote Link to comment Share on other sites More sharing options...
bluesj Posted January 16, 2022 Report Share Posted January 16, 2022 23 minutes ago, Donkey said: Thanks for the replies bluesj how do you get the blade to stay in the dowel with it being so thin a blade a saw cut would be to big for a tight fit so I guess glue in dave at Kelton I’ll try a bit of 15mm copper pipe tomorrow think that may work stonepark I’ve seen some from ussr on e bay but would prefer to buy British if I was to buy one I’ll have a look for this guy thanks all I just pushed the point in, it stay put long enough to trim a couple of hundred. Quote Link to comment Share on other sites More sharing options...
aberisle Posted January 16, 2022 Report Share Posted January 16, 2022 the 410 trimmer is here https://www.ebay.co.uk/itm/203793576926 Quote Link to comment Share on other sites More sharing options...
Stonepark Posted January 17, 2022 Report Share Posted January 17, 2022 16 hours ago, aberisle said: the 410 trimmer is here https://www.ebay.co.uk/itm/203793576926 That's the one. I got some extra bolts and have each bolt with standard nut and a nylock nut to stop it moving and have each bolt set for a pre determined case length, as it saves having to adjust the original all the time, you jst swap out the bolts. Quote Link to comment Share on other sites More sharing options...
johncrow Posted January 17, 2022 Report Share Posted January 17, 2022 Clay and game do a very good adjustable one Quote Link to comment Share on other sites More sharing options...
Donkey Posted January 17, 2022 Author Report Share Posted January 17, 2022 Thanks for all the replies I’ve ordered one from eBay Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.