Jump to content

Firing pin replacement cost


Hicky
 Share

Recommended Posts

14 hours ago, Old farrier said:

I’d have tried talking the disc out before ordering incase I needed a tool for the job 

some aya have a screw on the side you have to take out first 

its also a gas vent 

I checked, the yeoman doesn’t, asi confirmed. I had that problem in the past with a XXV. 
I can knock a tool up in work easy enough.

Hopefully it should prove straight forward….tempting fate 🤣

Link to comment
Share on other sites

1 hour ago, Hicky said:

I checked, the yeoman doesn’t, asi confirmed. I had that problem in the past with a XXV. 
I can knock a tool up in work easy enough.

Hopefully it should prove straight forward….tempting fate 🤣

last time i had one of those plates removed by a gunsmith (leon at Halesworth Richardsons) it was soaking in some sort of oil for 3 days first  :w00t:

Link to comment
Share on other sites

2 hours ago, Hicky said:

I checked, the yeoman doesn’t, asi confirmed. I had that problem in the past with a XXV. 
I can knock a tool up in work easy enough.

Hopefully it should prove straight forward….tempting fate 🤣

Tip , something I frequently did was to get a drill of the same diameter as the holes in the disc and make sure the holes are clean and may be deepened to at least 2 mm deeper if possible the deeper the better.

If making a toll then a long shaft with a handle that allows you put forward force as you turn .

All my keys were 12" long with flats on the side to put a spanner on  4 " from the front  .I also had keys that I used in a brace .

 

Most will come out with a little persuasion but some wont without brute force and the odd one had to be drilled out due to someone causing damage in trying to remove it .

Good luck.

Link to comment
Share on other sites

1 hour ago, TIGHTCHOKE said:

Blimey, I thought that was his 80th!   

I think his 80th was about 1974 .

1 hour ago, ditchman said:

you lot are riding for a damn good thrashing and ginger for afters:big_boss:

See , I told you he'd be a bit touchy . He hasn't been right since the old King died and Elizabeth II took over .

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...