Neil23 Posted May 28, 2022 Report Share Posted May 28, 2022 Β I went to fill my s410 xtra fac and afterwards I purged it and tried taking the probe of as Normal and it went of with a loud pop and now its not holding its air and it seems to be losing it out the hole in the side where the small filter/gauze is. As shown below. Apart from the bust o-ring I cant understand why its leaking. Any adeas folks Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted May 28, 2022 Report Share Posted May 28, 2022 Hello, cloverleaf on the UK AGF is the man to contact π Quote Link to comment Share on other sites More sharing options...
Neil23 Posted May 28, 2022 Author Report Share Posted May 28, 2022 46 minutes ago, oldypigeonpopper said: Hello, cloverleaf on the UK AGF is the man to contact π ππ» thanks for that.. I've removed the valve,and the o-ring on the small valve inside seems to have just aged I'm thinking, as its gone tapered and a tad hard so I'm going to fit a new seal kit a see if that fettle it . Quote Link to comment Share on other sites More sharing options...
scarecrow243 Posted May 28, 2022 Report Share Posted May 28, 2022 Hi use silicon grease on all the seals it helps keep them from going hard and brittleΒ Quote Link to comment Share on other sites More sharing options...
Neil23 Posted June 2, 2022 Author Report Share Posted June 2, 2022 I've just recieved a seal kit from best fittings came with sachet of silicone greace so I'll get them on when I get 5 then should be all goodπ€π» Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted July 6, 2022 Report Share Posted July 6, 2022 On 02/06/2022 at 15:16, Neil23 said: I've just recieved a seal kit from best fittings came with sachet of silicone greace so I'll get them on when I get 5 then should be all goodπ€π» Hello, did you sort it out ? Quote Link to comment Share on other sites More sharing options...
Neil23 Posted July 6, 2022 Author Report Share Posted July 6, 2022 yes I replaced the old seals with the new kit alls good now seems to be holding air without any issues. The old ones were no good at all one was in bits and some were like hard plasticΒ no wonder it wasnt holding air ππ» Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted July 15, 2022 Report Share Posted July 15, 2022 Hello, ok well done, π ,Β Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.