Go Go Gadget Posted April 4, 2010 Report Share Posted April 4, 2010 Got a problem with my crosman and i was wondering if any of you guys know how to fix it ? Been fine since i got it (mid december) but i cocked it today and the barrel wont snap back into the firing position. It closes almost shut but i cant get it to close all the way any help would be appreciated Dan Quote Link to comment Share on other sites More sharing options...
northeastshooter Posted April 4, 2010 Report Share Posted April 4, 2010 have you checked theres not a pellet in the jammed under the barrel rember with my old springer did that once and didnt see it straight away if not take it back to the shop Quote Link to comment Share on other sites More sharing options...
christy Posted April 4, 2010 Report Share Posted April 4, 2010 If you look in between the barrel and the main body of the gun there is a piece of metal protruding in each, the ends of which are cut at an angle so they mate up when closed. Sorry for the vagueness I do not know the technical term for them...datent? Anyway, if one has come loose and is out to far that would cause your prob as would dirt on them. Have a good look in that area see if anything is odd. Also check the cocking arm is behaving normally-look for loose screws anywere near the barrel joint. hth. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.