THE TOOL FOR ALL BERETTA 391 SEMI AUTO OWNERS

[The Clay Rascal]

:o HI ALL,

 

only 4 left

 

HERE FOR SALE IS A NEW INPROVED VERSION OF A BERETTA GAS VALVE SOCKET I HAD MADE.

 

THIS WAS BECAUSE I NEEDED SOMETHING TO REMOVE THE DREADED GAS VALE NUTS ON MY URIKA 2.

 

A SIMILAR ONE MADE OF AN UNKNOWN METAL COST OVER £45 TO BE SHIPPED HERE.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

THESE ARE MACHINED FROM HIGH GRADE TOOLING STEEL AND HAVE A QUARTER INCH SQUARE

 

HOLE DOWN THE CENTRE USING A SPARK ERODER MACHINE PLUS A HOLE THROUGH THE SIDE TO ENABLE THE USER TO USE A VARIETY OF SOCKET BARS TO UNDO THE GAS VALVE NUTS.

 

Spark eroding is a manufacturing process for removing excess material often not accessible or achievable by conventional machining processes on hard metals.

 

PERSONALLY I USE A SCREWDRIVER WITH QUARTER SOCKET BAR WITH MINE,

BUT YOU CAN ALSO USE A SOCKET WRENCH WITH THE QUARTER INCH SOCKET BAR, I ALWAYS USE COPPERSLIP ON THE GAS VALVE NUT THREAD TO ENABLE EASY REMOVAL.

 

TO BE COST EFFECTIVE MY RELATIVE MADE 10, SO I HAVE ONLY 4 LEFT FOR SALE. AND ONLY WANT TO COVER MY COSTS.

 

PRICE POSTED TO UK ONLY, 2ND CLASS RECORDED, SIGNED FOR IS £26.00 SOCKET ONLY, NO OTHER PARTS THESE CAN SOURCED LOCALY

 

PLEASE DO NOT CONFUSE THIS WITH A CHEAP ONE MADE IN THE UK OF AN UNKNOWN METAL.

FOR MORE PICTURES OR INFO PLEASE PM ME,

 

MY MANUAL TO DISASSEMBLE THE GAS VALVE IS NOW ONLINE AND CAN BE DOWNLOADED FOR FREE.

 

http://eastmiddleton.com/shotgun/BERETTA.3...EMBLY.GUIDE.pdf

 

THANKS MICK

[lanber man]

hi ,

more than likely far too late as i have just seen your post,any chance of getting one of the gas valve sockets you had made?

cheers ,

Bob Orpwood