roundy Posted September 6, 2010 Report Share Posted September 6, 2010 I have a Parker Hale O/U 12g, occasionally the top ejector will not eject the cart... It was playing up when I last used the gun so when I cleaned her I popped a little oil on the ejector slides. Tested with some snap caps and after the oil it was even worse! Any ideas? Quote Link to comment Share on other sites More sharing options...
Guest cookoff013 Posted September 6, 2010 Report Share Posted September 6, 2010 check if there are any burrs developed, spray, wd40 and clean out the runner guides etc replace worn springs. ! on a side note, check that your forarm is in good condition. Quote Link to comment Share on other sites More sharing options...
mark* Posted September 7, 2010 Report Share Posted September 7, 2010 i have the same problem with my shotgun, my bottom ejector arm wouldnt eject the cartridge so took it to gun shop and there replacing the ejector arm due to wear and tear (worn away) best advice i would give is take it in or replace yourself if you can get the part. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.