Practical Punisher Posted September 11, 2010 Report Share Posted September 11, 2010 Hello all, I am putting my SX3 up for sale. This is a SECTION1 FAC gun, (got me to 16th in the UK last year) The SX3 is 28" barrel 3.5" magnum chamber field (synthetic) It's had about 6000rds through it. I replaced the firing pin and replaced the gas piston (there is a fault with the original ones that sometimes snap) All of which was done under warranty. Its race ready, with a Browning extra large bolt handle. Benelli carrier release button (extended) Browning tru glo on the front. Benelli M2 follower in red Nordic +6 tube including spring Nordic clamp Original box Instruction manual Choke's Imp cylndr Full and Modified Browning gague to tell if your holding a 20,12,10 or 8 gague. Sling swivels inc original spring, end cap and follower Fetching stock mounted round carrier The gun takes 10+1 70mm or 11+1 67.5mm cartridges and is usable for standard or modified IPSC Shotgun. I am also including a choate pistol grip stock that has been modified to fit my SX3 , if that floats your boat, I liked it but went back to the original for a change from my Saiga 12. The gun has been used, there are the occasional wear marks near the clamp (see pic) the nordic tube has a few scratches but is over all in very good nick (it is practical after all) £720 all in Bargain! Honestly I don't really want to sell it but I don't use it enough to keep. I don't post a lot on here but I'm quite well know on the Practical Scene (Iain Corrigan) I can RFD at cost or collect in person (Northwest) Cash cheque PayPal etc Iain Quote Link to comment Share on other sites More sharing options...
trentotter Posted September 11, 2010 Report Share Posted September 11, 2010 Hello all, I am putting my SX3 up for sale. This is a SECTION1 FAC gun, (got me to 16th in the UK last year) The SX3 is 28" barrel 3.5" magnum chamber field (synthetic) It's had about 6000rds through it. I replaced the firing pin and replaced the gas piston (there is a fault with the original ones that sometimes snap) All of which was done under warranty. Its race ready, with a Browning extra large bolt handle. Benelli carrier release button (extended) Browning tru glo on the front. Benelli M2 follower in red Nordic +6 tube including spring Nordic clamp Original box Instruction manual Choke's Imp cylndr Full and Modified Browning gague to tell if your holding a 20,12,10 or 8 gague. Sling swivels inc original spring, end cap and follower Fetching stock mounted round carrier The gun takes 10+1 70mm or 11+1 67.5mm cartridges and is usable for standard or modified IPSC Shotgun. I am also including a choate pistol grip stock that has been modified to fit my SX3 , if that floats your boat, I liked it but went back to the original for a change from my Saiga 12. The gun has been used, there are the occasional wear marks near the clamp (see pic) the nordic tube has a few scratches but is over all in very good nick (it is practical after all) £720 all in Bargain! Honestly I don't really want to sell it but I don't use it enough to keep. I don't post a lot on here but I'm quite well know on the Practical Scene (Iain Corrigan) I can RFD at cost or collect in person (Northwest) Cash cheque PayPal etc Iain would you sell the pistol grip stock on its own ...cheers.... Quote Link to comment Share on other sites More sharing options...
Practical Punisher Posted September 12, 2010 Author Report Share Posted September 12, 2010 Sorry Trentotter, I'm selling the whole lot as a bundle. It's not too hard to buy one and modify yourself you know. Iain Quote Link to comment Share on other sites More sharing options...
straightshooter1 Posted September 25, 2010 Report Share Posted September 25, 2010 pm sent Quote Link to comment Share on other sites More sharing options...
Practical Punisher Posted September 27, 2010 Author Report Share Posted September 27, 2010 SOLD Quote Link to comment Share on other sites More sharing options...
uk_biker99 Posted April 20, 2012 Report Share Posted April 20, 2012 Hi Iain, what stock did you get for it and how much modification did it need? I'm amazed that still no one sells a pistol grip for the SX3! Any help appreciated mate! Cheers Keith Quote Link to comment Share on other sites More sharing options...
neil smith Posted April 20, 2012 Report Share Posted April 20, 2012 Hi Iain, what stock did you get for it and how much modification did it need? I'm amazed that still no one sells a pistol grip for the SX3! Any help appreciated mate! Cheers Keith Iain is a busy guy & Im not sure how often he gets on this forum, a PM may be the best way to get hold of him, alternatively he is regularly found over on the four4islands forum pages, which are more of a practical shooting based board. N Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.