Tuning Guide for S16S

[GamezBond]

Hello everyone,

I have just purchased a Logun S16S. I will be taking it with me out of the UK permanently to the US. Only bought it because it was a good deal, and a friend has had one of these and liked it a lot.

I been looking on the old fleabay for a tuning guide as there are no power restrictions. Most of the ones I see only explain the old trick of adding washers which doesnt work very well.

Does any one here know of an FleaBay item num or a seller, or have a proper guide to upping the power and also changing the O-rings please?

Or if any one has purchased such guide already, please let me know.

 

Please note I have ABSOLUTELY NO intentions of increasing the power while in the UK, and I am well aware of the law and consequences if I did increase the power above 12 ft/lb too.

 

ATB,

GB

[HEAD SHOT NO1]

Hi ,ate,

y friend who knows a lot about these tried every thing to up the power from 8 to 12 ft/ibd and there was know way he could do it.

The se;f regualator port is to small and no way of making it bigger unless you drilled it out.

I think he said it has to be done via the bottle so the bottle allows more air in.

[GamezBond]

Hi ,ate,

y friend who knows a lot about these tried every thing to up the power from 8 to 12 ft/ibd and there was know way he could do it.

The se;f regualator port is to small and no way of making it bigger unless you drilled it out.

I think he said it has to be done via the bottle so the bottle allows more air in.

 

Thanks. I will have access to our company's engineering dept where they have laths and can ask someone to do me a favour and drill bits and modify them. But will need to know exactly which bits to modify.

Did your friend also have an S16s?